ADTRAN Network Card NetVanta T1 FT1 User Manual

For more detailed documentation, visit us online at www.adtran.com.  
®
NetVanta T1/FT1 Network Interface Module (NIM)  
P/N 1202862L1  
Quick Start Guide  
INSTALLATION INSTRUCTIONS  
WAN-T1  
DBU  
1. Remove the power from the unit.  
2. Slide the option module into the option slot until the module is  
firmly seated against the chassis.  
3. Secure the pins at both edges of the module.  
4. Connect the cables to the associated device(s).  
5. Complete installation of the base unit.  
6. Restore power to the unit.  
SPECIFICATIONS  
Operating Modes Frame Relay, Multilink Frame Relay,  
PPP, Multilink PPP, HDLC  
T1/FT1 Interface  
Supported Standards: AT&T TR 62411,  
AT&T TR 54016, Bellcore TR 194, ANSI T1.403  
Line Rate: 1.544 Mbps ±75 bps  
Line Code: AMI or B8ZS  
Framing: D4 (SF) or ESF  
FT1 Line Rate: DS0 channelized (multiples of  
64 kbps)  
For NetVanta modules with outside plant  
connections, ensure that all cables are  
removed from the module before installing or  
removing it from the NetVanta chassis.  
Input Signal: 0 to -36 dB (DS1)  
Line Build-Out: 0, -7.5, -15, -22.5 dB (long),  
0 to 655 ft (short)  
DS0 Assignment: Programmable  
Connector: RJ-48C  
WAN-T1 NETWORK (RJ-48C) CONNECTION PINOUTS  
Pin  
1
Name  
R1  
T1  
Description  
Receive data from the network - Ring 1  
Receive data from the network - Tip 1  
Unused  
Clock Source  
Diagnostics  
Network, Internal  
2
Test Pattern Generation and Detection: QRSS, 511,  
3
215 - 1, 220 - 1, all ones, all zeros  
Network loopbacks (local and remote); responds to  
both inband and FDL loop codes  
4
R
Transmit data toward the network - Ring  
Transmit data toward the network - Tip  
Unused  
5
T
Alarm generation and detection  
6-8  
Network and user sets of performance data  
(15 minutes and 24 hours)  
An optional Dial Backup Interface Module (DIM) is  
required for dial backup applications.  
For a description of the DBU pinouts, refer to the  
Quick Start Guide included with your DIM  
shipment.  
Compliance  
Physical  
FCC Part 15 Class A, EN 55022 Class A  
ACTA/FCC Part 68, IC CS-03  
UL/CUL 60950  
Dimensions: 2.75-inch W x 4.25-inch D  
Operating Temperature: 0°C to 50°C  
Storage Temperature: -20°C to 70°C  
Relative Humidity: Up to 95 percent, noncondensing  
Important: For additional details on product  
features, specifications, installation, and safety, refer  
to the appropriate Hardware Installation Guide on  
the ADTRAN OS System Documentation CD  
shipped with the base unit and available online at  
NetVanta modules should be installed only in  
NetVanta Series products.  
Quick Start Guide, 61202862L1-13D, November 2006  
 
Copyright © 2006 ADTRAN, All Rights Reserved  

8e6 Technologies Computer Hardware MSA 004 005 User Manual
Accusplit Headphones AE2700 User Manual
ADC Network Card H4TU C 319 List 1 Line Unit User Manual
ADC Network Router Building Entrance Terminals BET User Manual
Addonics Technologies Blu ray Player DGBRC1 User Manual
AEG Microwave Oven 3534 E User Manual
AEG Washer Dryer 12710 User Manual
AG Neovo Universal Remote FST Series User Manual
Audiovox Automobile Electronics AS GMDLT03 User Manual
Behringer Music Pedal DR400 User Manual