AEG Washer 50265 User Manual

LAVAMAT 50265 ELECTRONIC  
Washing Machine  
User information  
 
Contents  
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
Environmental tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
6
6
8
9
Unit description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Drawer for Detergent and Conditioners . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Programme selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Programme Option Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Consumption Values and Programme Times . . . . . . . . . . . . . . . . . . . . . . 13  
Before the First Wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Prepare washing cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Sort washing and prepare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Types of Washing and Care Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Detergents and care agents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Which detergent and care agent? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
How much detergent and care agent? . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Running a washing cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Brief instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Opening and closing the door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Add the washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Adding detergent/conditioners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Setting the washing programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Changing Spin Speed/selecting o(RINSE HOLD) . . . . . . . . . . . . . . . . . . . 21  
Starting the Wash Programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Programme Progress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Changing the washing programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Washing cycle complete/removing the washing . . . . . . . . . . . . . . . . . . . . . 23  
3
 
Programme Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
Separate Rinsing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Separate Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Detergent Drawer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Washing Drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Main door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
What to do if ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Remedying Faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
If the washing results are not satisfactory . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Carrying out emergency drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Drain pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Additional rinse cycles (Á+/RINSE+) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Child Safety Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Installation and connection instructions . . . . . . . . . . . . . . . . 38  
Installation Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Installation of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Transporting the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Remove transport packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Prepare the installation place . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Installation on a concrete base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Installation on vibrating floors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Compensate for floor unevenness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
4
 
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Water connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Permissible water pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Water inflow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Water drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Delivery heads over 1m . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Warranty conditions / Customer service centres . . . . . . . 47  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50  
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
5
 
Operating Instructions  
Operating Instructions  
1 Safety  
The safety aspects of AEG electrical appliances comply with accepted  
technical standards and the German Appliance Safety Law. However, as  
manufacturers we regard it as our responsibility to inform you about  
the following safety instructions.  
Before Using for the First Time  
Refer to the "Installation and Connection Instructions" further on in  
this user information.  
If units are delivered in the winter months at minus temperatures:  
Store the washing machine at room temperature for a few hours be-  
fore putting it into operation.  
Correct Use  
The washing machine is only intended for washing normal domestic  
washing. If the appliance is used for a wrong purpose or wrongly op-  
erated, the manufacturer cannot assume any liability for any dam-  
ages.  
Additions or modifications to the washing machine are strictly for-  
bidden due to safety reasons.  
Use only detergent which is suitable for washing machines. Refer to  
the detergent manufacturer's instructions.  
The washing must not contain any flammable solvents. Also bear this  
in mind when washing pre-cleaned washing.  
Do not use the washing machine for dry-cleaning.  
Dyes /dye-removing agents may only be used in the washing machine  
if the manufacturer expressly permits use of these products. We can-  
not accept liability for any damage.  
Use only water from the water mains. Use rain water or service water  
only if it meets the requirements defined in DIN 1986 and DIN 1988.  
Frost damage is not covered by the warranty! If the washing machine  
is in a room subject to possible frost hazards, emergency emptying  
must be carried out if there is a risk of frost (see the Section "Carry-  
ing out emergency emptying“).  
6
 
Operating Instructions  
Safety of Children and Infirm Persons  
Packaging materials (e.g. films, polystyrene) can be dangerous for  
children. Risk of suffocation! Keep packaging away from children.  
The appliance is not intendet for use by young children or infirm per-  
sons without supervision.  
Children frequently cannot recognise hazards involved in handling  
electrical appliances. Therefore, ensure that they are properly super-  
vised during operation and never allow children to play with the  
washing machine -there is a risk that they can lock themselves inside it.  
Ensure that children or small animals do not climb into the washing  
machine's drum.  
When disposing of washing machines pull out the mains plug, destroy  
the door lock, cut off the electrical supply lead and dispose of the  
plug and remaining cable. This means that playing children cannot  
shut themselves in and cannot encounter a potentially lethal hazard.  
General Safety  
Repairs to the washing machine may only be carried out by qualified  
specialists. Incorrect repairs may result in significant risk to the user.  
If repairs are necessary, consult our customer service or your special-  
ist dealer.  
Never use the washing machine if the mains cable is damaged or the  
conrol panel, work surface or base panel area are so badly damaged  
that the interior of the unit is openly accessible.  
Switch off the washing machine before carrying out cleaning, care  
and maintenance work. Also pull the mains plug out of the socket or,  
– if it is permanently connected, – switch off the circuit breaker at  
the household power distribution box or completely remove the  
screw-in fuse.  
If operation is stopped, disconnect the appliance from the mains sup-  
ply and shut off the tap.  
Never pull the cable to remove the plug from the socket. Always  
pull the plug itself.  
Multiple connectors, couplings and extension cables must not be  
used. There is a risk of fire with overheating!  
Do not spray down the washing machine with a water jet. Risk of  
electric shock!  
The glass in the door becomes hot in the case of wash programmes  
with high temperatures. Do not touch!  
7
 
Operating Instructions  
Allow the washing solution to cool before carrying out an emergency  
emptying operation or cleaning the drain pump.  
Small animals can chew the power cables and water hoses. Risk of  
electric shock and danger of water damage! Keep small animals away  
from the washing machine.  
2 Disposal  
Disposing of the Packaging Material!  
Dispose of the packaging of your washing machine correctly. All pakka-  
ging materials used are environmentally-compatible and recyclable.  
Plastic parts are identified with internationally standardised abbrevi-  
ations:  
>PE<  
>PS<  
for polyethylene, e.g. packing films.  
for polystyrene, e.g. cushion parts (always CFC-free)  
>POM< for polyoxymethylene, e.g. plastic clips.  
Cardboard packaging is manufactured from recycled paper and  
should be deposited in the waste paper collection for recycling.  
Disposing of your old appliance!  
When you put your unit out of operation one day, please bring it to  
your nearest recycling centre or to your dealer.  
8
 
Operating Instructions  
2 Environmental tips  
A pre-wash cycle is not necessary in the case of washing which is not  
excessively dirt. This saves detergent, water and time (and is gentle on  
the environment.)  
If the indicated load capacities are taken full advantage of, the wash-  
ing machine is especially efficient.  
For small loads, use only one half to one third of the recommended  
detergent quantity.  
Suitable pre-treatment enables marks and limited amounts of dirt to  
be removed. You can then wash at a lower temperature.  
Wash slightly to normally dirty cottons with the energy-saving pro-  
gram.  
There is often no need for the softener. Try it once! If you use a drier,  
your washing will become soft and fluffy even without a softener.  
In the case of medium to high water hardness (hardness range runs to  
upwards, see "Detergent and care agents“), you should use a water  
softener. The detergent can then always be metered for hardness  
range I (= soft).  
9
 
Operating Instructions  
Unit description  
Front view  
Drawer for de-  
tergent and  
care agent  
Control panel  
Rating plate (be-  
hind filling door)  
Main door  
Flap in front of  
drain pump  
Screw feet  
(height-adjustable)  
Drawer for Detergent and Conditioners  
Pre-wash detergent,  
In-wash stain treat-  
ment products or  
water softener  
Main wash detergent  
(powder) and water  
softener if required  
Liquid conditioners  
(softeners, finishers,  
starch)  
10  
 
Operating Instructions  
Programme selector  
Control Panel  
Spin speed/RINSE HOLD button  
Programme Progress Display  
START/PAUSE  
button  
Programme  
DOOR indicator light  
options buttons  
Programme selector  
The programme selector is  
used to select the wash cycle  
(for example, water level, drum  
movement, number of rinses,  
spin speed) and the water tem-  
perature according to the type  
of washing.  
I(OFF)  
Switches the washing ma-  
chine off - at all other positions the machine is on.  
To amend programme settings selected by mistake, turn the selector  
to I(OFF). This restores the original settings.  
t (COTTONS/LINEN)  
Main wash cycle for Cottons/Coloureds (cottons/linens) from 30 °C to  
95 °C.  
}(EASY-CARES)  
Main wash cycle for easy-care fabrics (mixed fibres) at 40 °C or 60 °C.  
11  
 
Operating Instructions  
<(EASY IRON) position: main wash cycle at 40°C for easy-care fab-  
rics which, after washing with this programme, require only light iron-  
ing or no ironing at all.  
Ã(DELICATES)  
Main wash cycle for Delicates at 30 °C or 40°C.  
s(WOOL)/Ñ(SILK) P(Handwash)  
Main wash cycle (cold or 30 °C) for machine-washable or hand-washa-  
ble woollen items and silk, carrying the symbol ï(Handwash).  
u(GENTLE RINSE)  
Separate gentle rinse, for example to rinse hand-washed items  
(3 rinses, liquid conditioner washed in from æcompartment, spin).  
v(DRAIN)  
Draining of the water after one rinse hold (without spinning).  
The effect of o(Rinse Hold) is that the washing is left to soak in the  
last rinse water, without spinning.  
3
K(SPIN)  
Draining of the water after Rinse Hold and Spin, or separate Spin for  
hand-washed Cottons/Linen.  
ECO (ENERGY SAVING)  
Energy and water saving wash at approx. 60 °C for lightly to normally  
soiled Cottons/Coloureds (cottons/linen) with an extended wash time  
(cannot be combined with the ]/QUICK option).  
Programme Option Buttons  
The programme option buttons are used to adapt  
the programme to suit the degree of soiling of the  
wash. The programme options are not needed for  
normally soiled washing.  
The different functions can be combined together,  
depending on the programme.  
k(PRE-WASH)  
Warm pre-wash before the main wash, which fol-  
lows automatically; intermediate spin in the  
t(COTTONS/LINEN) and }(EASY CARES) pro-  
gramme; no intermediate spin in the à  
(DELICATES) programme.  
12  
 
Operating Instructions  
ä(STAIN)  
For heavily soiled or stained washing. In-wash stain treatment products  
are washed in at the optimum time as the programme progresses.  
Can only be selected with wash temperatures of 40 °C and above, as  
stain treatment products are only effective at higher temperatures.  
](QUICK)  
Shortened wash programme for lightly soiled washing.  
With the s(WOOL)/Ñ(SILK) P(Handwash) setting, the programme  
option buttons cannot be used. (Any buttons that are pressed have no  
effect.)  
3
Consumption Values and Programme Times  
The following tables give the values for selected programmes under  
standard conditions. The tables do, however, give a helpful guide for  
normal household use.  
Load  
in kg  
Water  
in litres  
Energy  
in kWh in minutes  
Time  
Programme selector/Temperature  
6
6
62  
64  
2,20  
1,12  
146  
135  
t (COTTONS/LINEN) 95  
ECO (ENERGY SAVING) 60 1)  
t (COTTONS/LINEN) 40  
} (EASY-CARES) 40  
à (DELICATES) 30  
6
3
3
62  
58  
62  
0,70  
0,52  
0,42  
120  
80  
66  
s (WOOL)/Ñ (SILK)  
P (Handwash) 30  
2
54  
0,45  
54  
1) Note: Programme setting for testing in accordance with standard EN 60 456.  
Actual consumption will vary from the indicated values depending on water  
pressure, water hardness, inlet water temperature, room temperature, type and  
quantity of washing, detergent used, variations in mains voltage and any option  
functions selected.  
13  
 
Operating Instructions  
Before the First Wash  
01. Pull out the washing powder drawer slightly.  
2. Pour about 1 litre of water through the washing powder drawer into  
the washing machine. With the next program start, this will close the  
solution container and the eco-sluice can function correctly.  
3. Run the washing cycle without washing (t/COTTONS/LINEN 95 °C,  
with half the amount of washing detergent). This removes residues left  
over from production on the drum and solution container.  
Prepare washing cycle  
Sort washing and prepare  
Sort the washing according to the care symbol and type (see "Wash-  
ing types and care codes").  
Empty all pockets.  
Remove metal objects (paper clips, safety pins etc.).  
To prevent damage to the washing and tangled washing: Close zip  
fasteners, button bed and pillow covers closed, tie up loose strings  
e.g. of aprons.  
Turn articles with double layered textiles inside out (sleeping bags,  
anoraks etc.).  
In the case of knitted coloured textiles and also with wool and tex-  
tiles with jewelry attached: turn inside out.  
Wash small and sensitive items (e.g. baby socks, tights and stockings,  
bras etc.) in a washing net, a cushion with a zip fastener or in larger  
socks.  
Handle curtains with particular care. Metal rollers or burred, plastic  
rollers must be removed or tied into a net or bag. We cannot accept  
liability for damage.  
Coloureds and white items must not be washed together in a washing  
cycle. This could discolour white washing or turn it grey.  
There is often excess dye in new, coloured items. It is best to wash  
such items separately the first time.  
Mix small and large items. This improves the washing effect and the  
washing is more favourably distributed during spinning.  
14  
 
Operating Instructions  
Fluff washing before placing into the washing machine.  
Do not place folded washing into the drum.  
Pay attention to the care instruction "wash separately" and "wash  
separately several times".  
Types of Washing and Care Symbols  
Care symbols help you to choose the correct wash programme.  
Washing should be sorted by type, and according to their care symbols.  
The temperature indicated on the care symbol is the maximum wash  
temperature.  
Cottons ç  
Cotton and linen items with this care symbol are not sensitive to ma-  
chine washing or high temperatures. The t(COTTONS/LINEN) pro-  
gramme is suitable for this type of washing.  
Linen èë  
Cotton and linen items with this care symbol are not sensitive to ma-  
chine washing. The t(COTTONS/LINEN) programme is suitable for  
this type of washing.  
Easy-Cares êí  
Materials such as fine cotton, wool-blend fabrics, viscose, and synthet-  
ics with these care symbols require gentler treatment. The }(EASY-  
CARES)/<(EASY IRON) programmes are suitable for this type of  
washing.  
Delicatesì  
Materials such as layered fibres, microfibres, viscose, synthetics, and net  
curtains with this care symbol require particularly careful treatment.  
The Ã(DELICATES) programme is suitable for this type of washing.  
Wool/silk and especially sensitive materials 9ìï  
Woollens, wool blends and silk with these care symbols are particularly  
sensitive to machine washing. The s(WOOL)/Ñ(SILK)  
P(Handwash) programme is suitable for this type of washing.  
Important! Materials with the care symbol  
(Not machine-washa-  
ñ
ble!) should not be washed in the washing machine.  
15  
 
Operating Instructions  
Detergents and care agents  
Which detergent and care agent?  
Use only detergents and care agents which are suitable for use in wash-  
ing machines. Always follow the manufacturer's instructions.  
How much detergent and care agent?  
The required quantity depends upon:  
extent of soiling of the washing  
on the hardness class of the mains water  
the amount of washing  
If the detergent manufacturer does not give any metering quantities  
2
for small loads, add a third less for half a load or only half the amount  
of detergent for small loads for <(EASY IRON) which is recommen-  
ded for a full load.  
Observe the instructions for use and dosing provided by the detergent  
and conditioner manufacturer.  
Water softener  
For medium to high water hardness (hardness class II upwards), you  
should use softener. Refer to the manufacturer's instructions. Then al-  
ways add the appropriate amount of detergent for hardness class I  
(= soft). The responisable water works will provide information on the  
local water hardness.  
Since the water softener is rinsed in before the main detergent (water  
pre-softening), 80% of the stated quantity of softener shown on the  
package is sufficient.  
2
Water hardness details  
Water hardness in °dH  
(German hardness scale)  
Water hardness in mmol  
(millimol per litre)  
Hardness class  
I - soft  
0 - 7  
7 - 14  
to 1.3  
1.3 - 2.5  
II - medium hard  
III - hard  
14 - 21  
2.5 - 3.8  
IV - very hard  
greater than 21  
greater than 3.8  
16  
 
Operating Instructions  
Running a washing cycle  
Brief instructions  
A washing cycle consists of the following steps:  
01. Open the door and load the washing.  
2. Close the door.  
3. Add detergent/conditioner.  
4. Set the appropriate washing programme:  
Set the programme and temperature using the programme selector  
Set programme options as required.  
5. Change the Spin Speed /select o (RINSE HOLD) as necessary.  
6. Start the washing programme by pressing the O/s(START/PAUSE)  
button.  
After the washing programme has ended:  
Important! If the washing cycle has ended with a Rinse Hold, select  
v(DRAIN) or K(SPIN) before opening the door.  
7. Open the door and remove the washing.  
K
The door can be opened after the  
L(END) light has come on.  
(DOOR) light goes off and the  
8. To switch off the washing machine: turn the programme selector to  
I(OFF).  
17  
 
Operating Instructions  
Opening and closing the door  
0
0
To open: pull the door by the handle.  
To close: push the door firmly shut.  
When the machine is switched on,  
K
the  
(DOOR) light and the  
O/s(START/PAUSE) light indicate  
whether the door can be opened  
K
indicator  
(DOOR)  
O/s(START/PAUSE)  
Can the door be opened?  
indicator  
flashes  
lit  
flashes  
lit  
yes, after about 2 minutes  
no1)  
yes  
is off  
flashes  
1) Door is locked due to high water level or high temperature.  
If the L(END) light flashes 4 times, it means there was an attempt to  
start a wash programme without closing the door properly. If this hap-  
pens, push the door firmly shut and start the wash programme again.  
3
Add the washing  
For the maximum filling quantities, see the "Program tables".  
See "Sort and prepare washing" for information on correctly preparing  
the washing.  
3
01. Sort and prepare the washing according to type.  
2. Open the filling door: Pull on the handle of the filling door.  
3. Fill with washing.  
Important! When closing the door, make  
sure no items of washing get stuck! This  
could damage textiles and the unit.  
4. Close the filling door securely.  
18  
 
Operating Instructions  
Adding detergent/conditioners  
For instructions concerning detergent and conditioners, see Section  
"Detergents and conditioners.  
3
01. Open the detergent dispenser drawer:  
press the flap on the drawer so as to be  
able to grasp the handle (1), and pull  
out the drawer (2).  
2. Add the detergent/conditioners.  
Compartment for main  
wash powder detergents  
(If you use a water softener and need  
the right-hand compartment for the  
pre-wash/soaking agent, add the water  
softener to the left-hand compartment  
with the main wash detergent.)  
Compartment for  
liquid conditioners  
(softeners, finishers, starch)  
Important! Do not fill the compart-  
ment past the MAX mark. If required,  
dilute concentrated fluids up to the MAX mark,  
dissolve powdered starches.  
Note: A small amount of water remaining in the liquid  
conditioner compartment is normal and does not affect  
rinse results.  
Compartment for Pre-wash detergent  
or in-wash stain treatment products  
(for the k / PRE-WASH or ä / STAIN programme options only)  
or for water softener  
3. Push the drawer in fully.  
If using liquid detergents/tablets:  
3
Add liquid detergent or tablets using the dosage container provided by  
the detergent manufacturer. Follow the instructions on the detergent  
packaging.  
19  
 
Operating Instructions  
Setting the washing programme  
For the appropriate pro-  
gramme, temperature and pos-  
sible programme options  
3
suitable for any type of wash-  
ing, see "Programme Tables".  
01. Select the desired wash pro-  
gramme and temperature with  
the programme selector.  
2. If required, select the appropriate programme  
option(s):  
The indicator of the selected programme option  
illuminates.  
To change the selection, press another button.  
To cancel a selection, press the button again.  
20  
 
Operating Instructions  
Changing Spin Speed/selecting o (RINSE HOLD)  
0
To change the Spin Speed for the final rinse or  
select o (RINSE HOLD):  
Keep pressing the Spin Speed/o (RINSE HOLD)  
button until the indicator light for the desired  
speed (or o /RINSE HOLD) comes on.  
If o (RINSE HOLD) is selected, the washing is left  
to soak in the last rinse water, without spinning.  
If the Spin Speed is not changed, the final spin is automatically ad-  
justed to suit the washing programme:  
3
t (COTTONS/LINEN)  
ECO (ENERGY SAVING)  
1000 revolutions per minute  
1000 revolutions per minute  
} (EASY-CARES)/<(EASY IRON) 1000 revolutions per minute  
à (DELICATES)  
s (WOOL)/ Ñ (SILK)  
P (Handwash)  
1000 revolutions per minute  
1000 revolutions per minute  
The speed of intermediate spins depends on the selected programme  
and cannot be changed.  
Starting the Wash Programme  
01. Check that the water tap is open.  
2. To start the wash programme, press the O/s(START/  
PAUSE) button. The wash programme starts.  
If L(END) flashes 4 times when the O/s(START/  
3
PAUSE) button is pressed, the door is not closed properly. In this case,  
push the door in firmly, and press O/s(START/PAUSE) again.  
Programme Progress  
Programme Progress Display  
Prior to the start, the programme steps chosen  
are displayed by the programme progress display.  
During the wash programme, the current programme  
step is displayed.  
21  
 
Operating Instructions  
Changing the washing programme  
Changing or cancelling the programme  
01. Press the O/s(START/PAUSE) button.  
2. Turn the programme selector to I(OFF). The washing programme is  
cancelled.  
3. Set another washing programme, if required.  
Otherwise, turn the programme selector to v (DRAIN) or K (SPIN) and  
press the O/s(START/PAUSE) button.  
(The water is drained or the washing is spun.)  
The washing programme can be temporarily interrupted at any time  
3
by pressing the O/s(START/PAUSE) button. It is then re-started by  
pressing the button again. A washing programme can only be changed  
after the programme selector has been turned to I(OFF).  
Selecting a programme option  
The programme options ](QUICK) or ä (STAIN) can still be selected  
after the programme has started.  
01. Press the O/s(START/PAUSE) button.  
2. Press the ](QUICK) or ä (STAIN) button.  
3. Press the O/s(START/PAUSE) button. The washing programme con-  
tinues.  
Changing the Spin Speed  
The Spin Speed can still be changed or o (RINSE HOLD) set, while the  
programme is running.  
01. Press the O/s(START/PAUSE) button.  
2. Change the spin speed with the Spin Speed/o (RINSE HOLD) button.  
3. Press the O/s(START/PAUSE) button again. The washing programme  
continues.  
22  
 
Operating Instructions  
Washing cycle complete/removing the washing  
Once a washing programme cycle has come to an end, L(END) illumi-  
nates on the Programme Progress Display.  
K
If o (RINSE HOLD) was selected, the indicator lights beside (DOOR)  
and L(END) come on.  
01. After a Rinse Hold, the water must first be drained:  
Either turn the programme selector to I(OFF), then turn to  
v (DRAIN) and press the O/s(START/PAUSE) button  
(the water is drained without spinning),  
or  
turn the programme selector to I(OFF), then turn to K (SPIN) and  
press the O/s(START/PAUSE) button  
(the water is drained and the washing given a spin. The spin speed  
can also be changed during the spin cycle).  
When this stage of the programme is completed, the L(END) light  
comes on.  
2. Open the door.  
K
The door can be opened after the  
L(END) light has come on.  
(DOOR) light goes off and the  
3. Remove the washing.  
4. Turn the programme selector to I(OFF).  
5. After the washing cycle is completed, pull out the detergent dispenser  
drawer slightly, to allow it to dry. Leave the door slightly open, to air  
the inside of the washing machine.  
Important! If the washing machine is not used for a long time:  
Close the water tap and disconnect the washing machine from the  
electricity mains.  
23  
 
Operating Instructions  
Programme Tables  
Washing  
The tables do not show all the possible settings, only those most likely  
to be selected for everyday purposes.  
Possible  
programme  
options  
Type of washing,  
Care symbol  
Max. Load1)  
(Dry weight)2)  
Programme selector  
Temperature [in °C]  
k(PRE-WASH)  
or  
ä(STAIN)  
](QUICK)  
Cottons  
ç
t(COTTONS/LINEN)  
6kg  
6kg  
95  
k(PRE-WASH)  
ECO (ENERGY SAVING) or  
ä(STAIN)  
Cottons/Coloureds3)  
èç  
k(PRE-WASH)  
or  
Coloureds  
èë  
t(COTTONS/LINEN)  
6kg  
3kg  
ä(STAIN)4)  
](QUICK)  
30 to 60  
}(EASY-CARES)  
40, 60  
k(PRE-WASH)  
or  
ä(STAIN)4)  
](QUICK)  
Easy-cares  
êí  
<(EASY IRON)5)  
40  
1kg  
3kg  
(or 15-20m2  
net curtains)  
Delicates  
ì
Ã(DELICATES  
30, 40  
k(PRE-WASH)  
](QUICK)  
s(WOOL)/Ñ (SILK)  
P (HANDWASH)  
COLD, 30  
Wool/Silk (Handwash)  
9ìï  
2kg  
1) The load amount inquiry operates in accordance with the EN 60456 standard  
load.  
2) A 10 litre bucket holds around 2.5 kg of dry clothes (cotton).  
3) Programme settings for testing in accordance with or in support of EN 60 456  
and IEC 60 456 are described in the chapter "Consumption Values and Pro-  
gramme Times.  
4) A temperature of at least 40 °C is needed for the STAIN programme, to make  
stain treatment products effective.  
5) Creasing can largely be avoided, but only by keeping wash loads under 1 kg,  
About 1 kg of dry clothes is equivalent to between 5 and 7 easy-care men's  
shirts.  
24  
 
Operating Instructions  
Separate Rinsing  
Max. load  
(dry weight)  
Type of washing  
Programme selector  
Cottons/Coloureds  
6kg  
3kg  
u(GENTLE RINSE)  
Easy-Cares/Delicates1)  
1) Reduced spin speed  
Separate Spinning  
Max. load  
(dry weight)  
Type of washing  
Programme selector  
Cottons/Coloureds  
Easy-Cares1)  
6kg  
3kg  
3kg  
2kg  
K(SPIN)  
Delicates1)  
Wool/Silk (Handwash)1)  
1) Reduced spin speed.  
25  
 
Operating Instructions  
Cleaning and Care  
Control panel  
Important! Do not use any furniture cleaning agents or aggressive  
cleaning agents in order to clean panel and control parts.  
0
Wipe control panels with a damp cloth. When doing so, use warm wa-  
ter.  
Detergent Drawer  
The detergent drawer should be cleaned from time to time.  
01. Pull the detergent drawer out as far as it will go.  
2. Remove the detergent drawer by pulling sharply.  
3. Take the conditioner insert out of the  
middle compartment.  
4. Clean the conditioner insert under  
running water.  
5. Clean the compartments with warm  
water from the rear side. It is best to  
use a flat brush.  
6. Push on the conditioner insert as far as it will go so that it is securely in  
place.  
26  
 
Operating Instructions  
7. Use a brush to clean the entire  
rinsing-in section of the washing  
machine, particularly also the noz-  
zles on the top side of the rinsing-  
in chamber.  
8. Set the detergent drawer into the  
guide tracks and push in.  
Washing Drum  
The washing drum is made of stainless steel. Rusting foreign bodies in  
the washing can cause rust deposits on the drum.  
Important! Do not clean the stainless steel drum with decalcifying  
agents containing acids, scouring agents containing chlorine or iron, or  
steel wool. Our Customer Service can provide suitable agents.  
0
Remove any rust deposits on the drum using a stainless steel cleaning  
agent.  
Main door  
0
Check on a regular basis to see if deposits or foreign objects are present  
in or at the rubber sleeve behind the door, and remove.  
27  
 
Operating Instructions  
What to do if ...  
Remedying Faults  
In the event of a fault, try to solve the problem yourself with the aid of  
the information provided here. If you call Customer Service to deal  
with one of the faults listed here or to remedy an operating fault, the  
customer service technician's visit will not be free of charge, even dur-  
ing the warranty period.  
Problem  
Possible cause  
Remedy  
The mains plug is not inserted. Insert the mains plug.  
The house fuse has blown.  
Replace the fuse.  
Close the door.  
There should be an audible  
click.  
The washing ma-  
chine does not  
work.  
The door is not closed prop-  
erly.  
The O/s(START/PAUSE)  
button was not pressed for  
long enough.  
Press and hold the O/s  
(START/PAUSE) button until  
the programme starts.  
Release child safety feature  
(see Section "Child Safety Fea-  
ture").  
The door cannot be The child safety feature is en-  
closed.  
gaged.  
The indicator  
L(END) flashes  
4 times.  
The door is not closed prop-  
erly.  
Close the door properly.  
Start the programme again.  
Open the water tap.  
Start the programme again.  
The water tap is closed.  
Close the water tap.  
Disconnect the hose from the  
water tap, remove the filter  
and clean under running wa-  
ter.  
The indicator  
L(END) flashes  
once.  
The filter in the socket of the  
inlet hose is blocked.  
Water tap is blocked with  
limescale or is faulty.  
Check the water tap and have  
it repaired if necessary.  
First turn the programme se-  
lector to I(OFF), then set the  
desired programme to the ex-  
act position.  
The indicator  
L(END) flashes  
8 times.  
The programme selector has  
not clicked into place cor-  
rectly.  
28  
 
Operating Instructions  
Problem  
Possible cause  
Remedy  
Remove the transit packaging  
as described in the Installation  
and Connection instructions.  
Transit packaging was not re-  
moved.  
Adjust the feet according to  
the Installation and Connec-  
tion instructions.  
The machine is not level.  
The washing ma-  
chine vibrates when  
operating, or is  
noisy.  
There is very little washing in  
the drum (for example one  
dressing gown).  
This does not affect the opera-  
tion of the machine.  
Check the drain hose and re-  
move any kinks if necessary or  
clean the water pump and if  
necessary remove any foreign  
bodies from the pump hous-  
ing.  
Water could not be fully  
drained out before spinning  
because the drain hose is  
kinked or the water pump is  
blocked.  
It may be necessary to reduce  
Probably too much detergent the amount of detergent used.  
Excessive foaming  
during the main  
wash.  
has been used  
Follow the detergent manu-  
facturer's recommendations.  
The screw connection of the Tighten the inlet hose screw  
inlet hose is leaking.  
connection.  
Check the drainage hose and  
replace if necessary.  
The drainage hose is leaking.  
The drain pump cover is not  
correctly closed.  
Close the cover correctly.  
Water leaks out  
of the washing ma-  
chine.  
Stop the programme, remove  
Washing is caught in the door. the washing caught in the  
door. Restart the programme.  
Close the emergency empty-  
ing hose (see Section "Carry  
The emergency emptying hose  
out emergency emptying“).  
is not correctly closed or is  
leaking.  
Call your local Service Force  
Centre if the emergency emp-  
tying hose is leaking.  
Fabric softener was  
not rinsed in, the  
æcompartment is  
filled with water.  
The insert in the conditioner Clean the detergent dispenser  
compartment is not correctly drawer and attach the condi-  
attached or is blocked.  
tioner insert correctly.  
29  
 
Operating Instructions  
Problem  
Possible cause  
Remedy  
Pay attention to the maximum  
load quantity (see Programme  
Tables). In the case of easy-  
care fabrics, select the  
Washing is heavily Probably too much washing  
creased.  
has been put in the drum.  
< (EASY IRON) programme.  
The washing has  
not been spun as  
dry as usual.  
The washing was not able to Always load the drum as ful as  
be distributed evenly in the  
drum prior to spinning.  
possible with a combination of  
large and small items.  
The drain hose is kinked.  
Remove the kink.  
Contact your local Service  
Force Centre. For pumping  
heights over 1 m a conversion  
kit is available as a special ac-  
cessory.  
The maximum pump height  
(outlet height 1 m from  
the base of the appliance)  
is exceeded.  
Washing is not  
thoroughly spun,  
water remains visi-  
ble in the drum.  
The indicator  
Switch off the machine and  
disconnect the mains plug.  
Clean the drain pump.  
L(END) flashes  
twice.  
The drain pump is blocked.  
For siphon attachments:  
the siphon is blocked.  
Clean the siphon.  
Wait until the programme has  
K
ended, the  
(DOOR) light  
goes off and the L(END)  
light is lit.  
The door cannot be  
opened when the  
washing machine  
is on.  
If it is necessary to open the  
door immediately,  
Door is locked due to high  
water level, or high tempera-  
ture.  
Turn the programme selector  
to I(OFF); then turn it to  
v(DRAIN). Press the O/s  
(START/PAUSE) button.  
When the water has been  
pumped out, the door can be  
opened.  
O/s(START/  
K
PAUSE) and  
(DOOR) lights come  
on.  
30  
 
Operating Instructions  
Problem  
Possible cause  
Remedy  
The programme continues  
when power is restored.  
If washing has to be taken out  
during a power cut:  
Turn the control knob to  
I(OFF).  
Carry out emergency emptying  
(see Section "Carry out emer-  
gency emptying“).  
The failure may be caused by  
Power failure dur- a blown house fuse or by a  
ing a wash pro-  
gramme (all  
indicator lights  
are off).  
mains supply fault into the  
house.  
(For safety reasons, the door  
remains locked for around  
2 minutes.)  
After about 2 minutes,  
the door can be opened by  
pulling on the handle.  
The water tap is not fully  
opened.  
Open the water tap fully.  
Remnants of deter-  
gent are building  
up in the detergent  
drawer.  
Close the water tap. Unscrew  
the inlet hose from the water  
tap and from the machine.  
Clean the filter.  
The inlet hose filter in the in  
coupling of the inlet hose at  
the tap is blocked.  
The cause is probably a deter- This has no negative effects on  
gent with a high silicate con- rinse results; use a liquid de-  
The rinse water is  
cloudy.  
tent.  
tergent if necessary.  
When pressing  
a programme op-  
tion button,  
the corresponding  
indicator does not  
light up.  
The selected programme op-  
tion cannot be combined with Make another selection.  
the set programme.  
31  
 
Operating Instructions  
If the washing results are not satisfactory  
If the washing has turned grey and if limescale is deposited in the  
drum, then  
Too little detergent was used.  
The wrong detergent was used.  
Special soiling was not pre-treated.  
Program or temperature not set correctly.  
If multi-component detergents are used, the individual components  
were not used in the correct ratio.  
If there are still grey spots on the washing,  
Washing soiled with ointments, grease or oils was washed with too  
little detergent.  
Too lower temperature was used for washing.  
A frequent cause is that softener - particularly that in concentrated  
form - has reached the washing. Wash out such spots quickly and use  
the softener concerned carefully.  
If at the end of the last rinse foam is still visible  
Modern detergents can also cause foam in the last rinse. However,  
the washing is still sufficiently rinsed.  
If there are white remnants on the washing  
These are insoluble components of modern detergents. They are not  
the result of an insufficient rinsing effect.  
Shake or brush out the washing. In future, perhaps you should turn  
the washing inside out before washing it. Examine your choice of de-  
tergent and if necessary use liquid detergent.  
32  
 
Operating Instructions  
Carrying out emergency drainage  
If the washing machine no longer pumps off the washing solution,  
emergency drainage must be performed.  
If the washing machine is in a room where there is a risk of frost,  
emergency drainage must be performed if there is a possibility of  
frost.  
In addition: unscrew the inlet hose form the water tap and place it on  
the floor. Empty the drainage hose.  
Warning! Switch off the washing machine before performing emer-  
gency drainage and pull out the mains plug.  
1
Caution! The washing solution escaping from the emergency drainage  
hose may be hot. There is a risk of scalding! Allow the washing solution  
to cool down before performing emergency drainage.  
01. Place a flat collecting vessel in order to collect the washing solution  
which is draining off.  
2. Fold open the flap in the right section  
of the base outwards and pull it off.  
3. Remove the emergency drainage hose  
from its holder.  
4. Place the container under the hose.  
5. Detach the plug of the emergency  
drainage hose by turning it anticlock-  
wise and pull it out.  
The washing solution runs out. Depend-  
ing on the amount of solution, it may  
be necessary to empty the collecting  
vessel several times. To do this, close the  
emergency drainage hose temporarily  
with the plug.  
33  
 
Operating Instructions  
When the water is completely drained:  
6. Push the plug securely into the emergency drainage hose and turn it  
clockwise to secure it.  
7. Replace the emergency drainage hose in its holder.  
8. Put on the flap and close.  
Drain pump  
The drain pump is maintainance-free. The cover of the drain pump is  
required to be opened only in the event of a malfunction when no  
more water is being pumped out, e.g. if the pump wheel is blocked.  
Before loading the machine, please always ensure that there are no for-  
eign objects present in the pockets or inbetween the items to be  
washed. Paper clips, nails etc. which may find their way into the wash-  
ing machine along with the washing will remain in the drain pump  
housing (foreign objects are protected by the pump wheel).  
To restart the drain pump when it is blocked, please proceed as follows:  
Warning! Switch off the washing machine and remove the mains plug  
before cleaning the drain pump!  
1
01. First carry out an emergency emptying procedure (see section “Carrying  
out emergency emptying”).  
2. Place a cloth on the floor in front of the cover of the drain pump.  
Residual water may run out.  
3. Unscrew the drain pump cover in an  
anti-clockwise motion and pull it out.  
4. Remove any foreign objects and fabric  
lint from the pump housing and from  
the pump wheel.  
34  
 
Operating Instructions  
5. Check that you are able to turn the  
pump wheel at the very rear of the  
pump housing. (If the wheel rotates  
with a jerky motion, this is normal.) If  
you cannot turn the pump wheel, please  
contact customer service.  
6. Replace the pump cover. Laterally insert  
the webs on the cover into the guide  
slots and securely screw on the cover in  
a clockwise motion.  
7. Close the emergency emptying hose and  
place it in the holder.  
8. Close the flap.  
35  
 
Operating Instructions  
Additional rinse cycles (Á+/RINSE+)  
The washing machine is set for very economical water consumption.  
However, people who suffer from allergies to detergents, it can be  
helpful to rinse with extra water.  
If Á+ (RINSE+) is selected, two extra rinses are added to the  
3
t (COTTONS/LINEN), }(EASY-CARES), <(EASY IRON), and  
à (DELICATES) programmes.  
When delivered, the machine is not set for additional rinses.  
To set the additional rinse cycles:  
01. Turn the programme selector to t (COTTONS/LINEN, }(EASY-  
CARES)/<(EASY IRON) or à (DELICATES) (any temperature).  
2. Press and hold k (PRE WASH) and ](QUICK) at the same time for at  
least 2 seconds. On the programme progress display the Á (RINSE)  
and Á+ (RINSE+) lights come on. The additional rinse cycles are set. It  
remains set until cancelled again.  
The additional rinse cycles raise water consumption and extend pro-  
gramme times.  
3
To cancel the additional rinse cycles  
01. Turn the programme selector to t (COTTONS/LINEN), }(EASY-  
CARES)/<(EASY IRON) or à (DELICATES) again.  
2. Press and hold k (PRE WASH) and ](QUICK) at the same time for at  
least 2 seconds. Á+ (RINSE+) goes off on the programme progress  
display. The additional rinse cycles are cancelled.  
36  
 
Operating Instructions  
Child Safety Feature  
If the child safety feature is set,  
the filling door can no longer be  
closed and no washing program  
can be started.  
Setting the child safety feature  
0
Use a coin to turn the rotary knob  
on the inside of the filling door  
clockwise as far as it will go.  
Warning! The rotary knob must  
not be in a vertical position after  
adjustment, otherwise the child  
safety feature is not active. The ro-  
tary knob must project as shown in  
the diagram  
1
Cancelling the child safety  
feature  
Turn the rotary knob anticlockwise  
as far as it will go.  
0
37  
 
Installation and connection instructions  
Installation and connection instructions  
Installation Safety Precautions  
Do not tilt the washing machine onto its front or onto its right side  
(viewed from the front). Electronic components can get wet.  
Check the washing machine for transport damages. A damaged unit  
must never be put into operation under any circumstances. In the  
event of damage, please contact your supplier.  
Ensure that all parts of the transport safeguard are removed and that  
the unit is splash protected, see "Removing transport safeguard".  
Otherwise, the units or neighbouring furniture can be damaged when  
spinning.  
Always insert the plug into a correctly installed earthed socket.  
In the case of permanent connection: A permanent connection may  
only be made by an authorised specialist.  
Before putting the machine into operation, ensure that the mains  
voltage and current type shown on the unit's rating plate correspond  
with those at the place where the machine is being installed. The fuse  
rating is also found on the rating plate.  
Should work be carried out on the water supply installations in order  
to allow the machine to be connected properly to the water supply,  
this work must be carried out by an authorised installer.  
Should work be carried out on the mains supply in order to allow the  
machine to be connected properly to the electricity supply, this work  
must be carried out by an authorised electrician.  
The mains lead may only be replaced by the customer service or by an  
authorised electrician.  
38  
 
Installation and connection instructions  
Installation of the appliance  
Washing machines with curved panels are not suitable for installing  
under units.  
3
Transporting the appliance  
Do not place the washing machine on its front or on its right side  
(viewed from the front). Otherwise, electrical components can get  
wet.  
Never transport the unit without the transport safeguard. Do not re-  
move the transport safeguard until the appliance is at the installation  
location. Transporting the unit without the transport safeguard can  
damage it.  
Lift the appliance neither by an open filling door nor by the base.  
When transporting the unit with a sack trolley: Attach the sack trol-  
ley only at the side.  
Remove transport packaging  
Important! It is essential to re-  
move the transport packaging be-  
fore putting the appliance into  
operation. Keep all parts of the  
transport packaging in a safe  
place for future use.  
01. Open both hose holders on the  
appliance's rear side and remove  
the hoses and mains cable.  
2. Pull both hose holders off the ap-  
pliance with a strong pull.  
39  
 
Installation and connection instructions  
The special spanner (A) and the  
caps (B) (2 each) and (C) (1 each)  
are supplied with it.  
3
3. Remove the screw D, including  
the compression spring with the  
special spanner A.  
4. Cover the hole with the cap C.  
Important! When fitting the  
plastic caps, press until they snap  
into the rear panel securely.  
5. Remove the two screws (E) with  
the special spanner (A).  
6. Remove the 4 screws (F).  
7. Remove the transit bar (G).  
8. Screw the 4 screws (F) back in for  
safe keeping.  
9. Close the 2 large holes with the  
caps (B).  
Important! When fitting the  
plastic caps, press until they snap  
into the rear panel securely.  
40  
 
Installation and connection instructions  
Prepare the installation place  
The installation surface must be clean and dry, free of floor polish  
residues and other greasy coatings so that the unit does not slip  
away. Do not use lubricants as a sliding aid.  
Installation on a high-veil carpet or floor tiles with soft sponge backs  
is not recommended because the standing safety of the appliance is  
then no longer ensured.  
By installation surfaces with small-format tiles, lay a conventional  
rubber mat underneath.  
Minor unevenness of the floor surface should never be levelled out by  
laying pieces of wood, card or similar materials, but rather should al-  
ways be compensated for by adjusting the screw feet.  
If, for space reasons, it is not possible to avoid setting up the unit di-  
rectly next to a gas or coal-fired cooker: install a thermal insulation  
panel between the cooker and washing machine (85 x 57cm) which  
must have an aluminium film on the side against the cooker.  
The washing machine must not be set up in a room where there is a  
danger of frost. Frost hazard!  
Flexible feed and drain tubings may not be crinkled or squeezed.  
Installation on a concrete base  
If the unit is set up on a concrete base,  
for safety reasons it is essential to fit  
stand plates in which the washing ma-  
chine is adjusted. The stand plates are  
available from Customer Service under  
the spare parts number 645 425 058.  
Installation on vibrating floors  
Where the floor vibrates, particularly in the case of wooden beam  
floors with pliable boards, securely screw a water-resistant wooden  
panel at least 15mm thick onto at least 2 floor planks. If possible, set up  
the unit in the corner of a room, as the wooden floor is optimally re-  
strained there and is therefore least likely to be subject to resonance vi-  
brations.  
41  
 
Installation and connection instructions  
Compensate for floor unevenness  
Floor unevenness can be compensated for and the height can be cor-  
rected with the four adjustable screw feet. The height can be adjusted  
in the range +10 .. -5mm.  
To adjust the feet use the special spanner supplied for removing the  
transport braces.  
01. Slide the special key firmly onto  
the hexagon head of the threa-  
ded foot as far as it will go.  
2. Adjust the screw feet so that the  
unit is horizontal and stable. The  
unit must not wobble over when  
loaded.  
3. If necessary, check the setting  
with a spirit level.  
Important! Minor unevenness of  
the floor surface should never be  
levelled out by laying pieces of  
wood, card or similar materials,  
but rather should always be com-  
pensated for by adjusting the adjustable feet.  
42  
 
Installation and connection instructions  
Electrical connection  
Details of the mains voltage, current  
type and required fuses can be  
found on the rating plate. The ra-  
ting plate is located at the top  
above the filling door.  
For permanent electrical connection  
within the electrical circuit, provi-  
sions must be made which allow for electrical disconnection of the ap-  
pliance from the mains with a contact opening of at least 3 mm at all  
poles. Suitable devices include circuit breakers, fuses (threaded fuses  
must be entirely removed from the socket), ground fault circuit inter-  
rupters and contactors. Permanent connection may only be carried out  
by an authorised electrician.  
This appliance complies with the following EC directives:  
The "Low Voltage Directive" 72/23/EU with changes  
The "EMC Directive" 89/336/EU with changes  
;
Water connection  
The washing machine has safety features which prevent back-contami-  
3
nation of the drinking water and which conform to the national regu-  
lations of the water authorities (e.g. for Germany: DVGW guidelines).  
This means that additional protective measures in the installation are  
not necessary.  
Important!  
Units for connecting to cold water must not be connected to hot wa-  
ter.  
Use only new hose sets for the connection.  
Permissible water pressure  
The water pressure must be at least 1 bar (= 10 N/cm2 = 0.1 Mpa), max-  
imum 10 bar = 100 N/cm2 = 1 Mpa).  
If more than 10 bar: Connect a pressure-reduction valve upstream.  
If less than 1 bar: Unscrew the inlet hose on the unit side at the sole-  
noid intake valve and remove the flow regulator (to do this, remove  
the filter with pointed pliers and take out the rubber washer behind).  
Replace the filter.  
43  
 
Installation and connection instructions  
Water inflow  
A pressure hose 1.5m in length is supplied.  
If a longer inflow hose is required, only a VDE-approved, complete set  
of hoses with fitted hose screw connections offered by our Customer  
Service is permissible.  
Hose sets in lengths of 2.2m, 3.5m and 5m are available for washing  
machines without Aqua-Control.  
Hose sets in lengths of 2.0m, 2.9m and 3.9m are available for wash-  
ing machines with Aqua-Control.  
Caution! Never cut into pieces in order to extend the hoses!  
Sealing rings are supplied either in the plastic  
nuts of the hose screw connection or in the enc-  
losed pack. Do not use other seals!  
3
01. Connect the hose with the angled connection to  
the machine.  
Caution!  
Do not lay the infeed hose ver-  
tically downwards. Instead, turn  
it to the right or left as shown  
in the diagram.  
Tighten the hose connection  
only by hand.  
2. Connect the hose with the straight connection  
to a water tap with a R 3/4 (inch) screw thread.  
Caution! Only tighten the screw connection ma-  
nually.  
3. By slowly opening the water tap before putting  
the washing machine into operation, check that  
the connection is free of leaks.  
44  
 
Installation and connection instructions  
Water drain  
The drainage hose can either be connected to a siphon or hung in a  
wash basin or discharge basin or a bath tub.  
Only original hoses may be used for extensions (max. 3m laid on the  
floor and then up to 80cm high). Customer Service stocks drainage  
hoses in lengths of 2.7 and 4m.  
Important! It is essential to lay the drainage hose without kinks.  
Water drain-off inside a siphon  
The grommet on the hose end fits all  
standard siphon types.  
Secure the connection between the  
grommet and siphon with a hose clamp.  
0
Water drain-off inside a basin  
Important!  
Small basins are not suitable for  
drainage. Water could overflow!  
The end of the drainage hose must not  
be submerged in the pumped-out wa-  
ter. Otherwise, the water could be  
sucked back into the unit.  
When hanging in a wash basin or a  
bath tub, the drainage hose must be  
secured with the supplied attachable  
bend to prevent it slipping. The back-  
surge force of the escaping water  
could otherwise force the hose out of  
the basin.  
0
Tie the bend to the tap or the wall using  
a piece of string.  
Delivery heads over 1m  
To pump off the washing / rinsing solution, every washing machine has  
a drain pump which carries liquids up to a height of 1m via the drain-  
age hose, calculated from the machine's standing surface.  
Please contact Customer Service for delivery heads of over 1m.  
45  
 
Technical data  
Adjustment possibility  
Filling quantity (program-dependent)  
Area of use  
Approx. +10 / -5mm  
max. 6kg  
Domestic  
Drum speed, spinning  
Water pressure  
See rating plate  
1-10 bar (= 10 - 100 N/cm2  
= 0.1 - 1.0 Mpa)  
Dimensions  
(dimensions in mm)  
46  
 
Warranty conditions / Customer service centres  
Warranty conditions / Customer service  
centres  
Weitere Kundendienststellen im Ausland  
In diesen Ländern gelten die Garantiebedingungen der örtlichen Partner. Diese können  
dort eingesehen werden.  
Further after-sales service agencies overseas  
In these countries our AEG agents’ own guarantee conditions are applicable. Please ob-  
tain further details direct.  
Autres agences étrangères assurant le service après-vente  
Dans ces pays, les conditions de garantie des concessionnaires de la région sont vala-  
bles. Vous pouvez les consulter sur place.  
Otros puntos de Postventa en el extranjero  
En estos países rigen las condiciones de nuestros representantes locales. las cuales  
pueden ser consultadas allí mismo.  
Ulteriori uffici del servizio tecnico assistenza clienti all’estero  
In questi paesi sono valide le condizioni di garanzia dei partner locali. Queste condizioni  
possono essere esaminante sul luogo.  
Serviços de assistência técnica no estrangeiro  
Nestes países são válidas as condições de garantia dos concessionários locais, podendo  
aí ser consultadas.  
További vevöszolgálati irodák külföldön  
Ezekben az országokban a mi AEG vevöszolgálatainknál saját jótállási feltételek alka-  
lmazhatók. A további adatokat kérjük közvetlenül szerezzék be.  
Servisne službe  
Na garancijskem listu boste našli seznam pooblašèenih servisnih služb AEG.  
U.A.E. Abu Dhabi  
Universal Trading Company Jordan Household  
Jordan  
Malta  
ITC  
P.O. Box 43 99  
Tel.: 335331  
Supply Co. Ltd.  
P.O. Box 3/68  
International Trading Com-  
pany  
Amman/Tel.: 69 70 50  
White House Building  
Mountbatte Street  
Blata L-Bajda/Tel.: 220644  
Egypt  
Kanada  
EURO-LINE Appliances  
Mauritius  
Happy World Centre Ltd.  
Middle East Commercial  
Center  
2150 Winston PARK Drive 20 P.O. 7 54  
P.O. Box 19  
Kairo-Heliopolis  
Tel.: 29917/31634  
Oakville, Ontario L6H 5V1  
Tel.: 905 829 3980  
Fax: 905 829 3985  
1 Chausee Street  
Port Louis  
Tel.: 25355  
47  
 
Warranty conditions / Customer service centres  
Australia  
Korea (South)  
Core Incorp.  
3/F Chewoo Bldg.  
200 Nonhyun-Dong  
Kangnam-Ku  
Namibia  
ANDI-Co Pty. Ltd  
9 Kingston Town Close  
Oakleigh VIC 3166  
Tel.: (03) 9569 1235  
Fax: (03) 9569 1450  
AEG NAMIBIA (PTY) LIM-  
ITED-Jeppe Street  
Northern Industrial Area  
Windhoek  
Tel.: (061) 21-6082/4  
Fax: (061) 217838  
Seoul  
Telefon 82 2 549 89 61  
Bahrain/Arabian Gulf  
A.A. Zayani & Sons  
P.O. Box 9 32  
Croatia  
Electrolux D.O.O.  
Suplova 7  
New Zealand  
Euro-Life New Zealand Ltd.  
Privat Bag  
Bahrain  
Tel.: 261060  
10000 Zagreb  
Tel.: 1 61 19512  
Fax: 1 61 19513  
58 Symonds Street  
Auckland  
Tel.: (09) 525 2222  
Bulgaria  
Kuwait/Arabian Gulf  
Nouvelle Caledonie  
Socometra N.C.  
B.P. 483  
Nouman  
Tel.: 275444  
Electrolux Bulgaria E.O.O.D. Ali Al-Ghanim Est.  
91 Levski Blvd.  
1000 Sofia  
Tel.: 2 806676  
Fax. 2 980 5276  
P.O. Box 10 83  
Tel.: 5322463  
Fax: 5242114  
Cyprus  
Hadjikyrlakos & Sons Ltd.  
Prodromou 121  
P.O. Box 21587  
Lebanon  
Oman  
Adib & Assaferi  
P.O. Box 539  
Tripoli  
Moshin Haider Darwish  
P.O. Box 1 35  
Muscat  
Nicosia 1511  
Tel.: 703743  
Service Telephones:  
Nicosia 02 481226  
Limassol 05 562182  
Larnaca 04 633929  
Paphos 06 932 699  
Estonia  
Electrolux Estonia Ltd.  
Mustamäe tee 24  
EE0006 Tallinn  
Latavia  
Poland  
Electrolux Latavia Ltd.  
Terlaton Street 42/44  
1011 Riga  
Tel.: 371 2 297821  
Fax: 371 2 821286  
Electrolux Poland Sp. zo.o.  
ul. Domaniewska 41  
02-034 Warszawa  
tel.: 022 874 33 33  
fax: 022 874 33 00  
Tel.: (372) 6 650 090  
Fax: (372) 6 650 092  
Hongkong  
Lthuania  
Electrolux Lthuania  
Verkui 29  
2600 Vilnus  
Tel.: 372 272 3326  
Fax: 372 272 3366  
Russia  
Wo Kee Services Ltd.  
585-609 Castle Peak Road  
Kwai Chung N.T.  
Hongkong  
Electrolux Russia Ltd.  
16 Olympiysky prospekt  
129090 Moscow  
Tel.: (095) 937 7837  
Fax: (095) 926 5513  
Tel.: 2494 4000  
48  
 
Warranty conditions / Customer service centres  
Israel  
Malaysia  
Saudi Arabia  
Alia Trading Corporation  
P.O. Box 4101  
King Abdul Aziz Street  
Riyadh  
Tel.: 4645977  
Al Nahas Est.  
Musaidia Market I  
P.O. Box 1 15 29  
Jeddah  
Electricity & Electronic  
Services-Evis LTD.  
19 Hataasia st.  
Arzbergh Engineering  
No. 49A/B, Jalan Petaling  
Utama 7  
4600 Petaling Jaya  
Tel.: 3 795 1084  
Raanana,  
Industrial area 43654  
Tel: 972-9-7448118  
Fax: 972-9-7603618  
Fax: 3 795 1082  
Tel.: 6606852  
Japan  
Electrolux Japan Ltd.  
Singapore  
Arzbergh Engineering  
Slovenia  
Electrolux Slovenia D.O.O.  
Domestic Appliances Depart- 19 Tanglin Road 06-07  
ment Singapore 247909  
Maruzen Showa Warehouse Tel.: 65 7356572  
Traska Ul. 132  
1000 Ljubljana  
Tel.: 61 1234 137  
Fax: 61 1234 238  
Building  
Fax: 7351124  
Tookai 4-5-12, Ota-ku  
143-006 Tokyo  
Tel.: 0120-13-7117  
Fax: 03-3790-5257  
Thailand  
Slovakia Rep.  
Electrolux Slovakia S.R.O.  
Seberiniho 1  
821 03 Bratislava  
Tel.: 02 4333 4322, 4355  
Fax: 02 4333 6976  
South Africa  
AEG (Pty) Ltd.  
55, 12th Road  
P.O. Box 1 02 64  
Kew/Johannesburg 2000  
Tel.: 8069111  
OLYMPIA Thai Ltd.  
44 Ratchadapisek Road  
10320 Bangkok  
Tel.: 2 513 6111  
Fax: 2 513 2574  
Hungary  
Electrolux Lehel KFT  
(AEG Div)  
Erzsébet Királyné útja 87.  
1142 Budapest  
USA  
Syria  
ANDI Co. Appl. Inc. East  
65 Campus Plaza  
Edison, New Jersey 0837  
USA/Tel.: (201) 2258839  
Masri & Shami  
P.O. Box 24 96  
Damascus  
Tel.: 214080  
Tel.: 00361/467-3200  
49  
 
Index  
Index  
C
R
Cancelling the programme . . . . . . . . . . . . 22  
Changing the programme . . . . . . . . . . . . . 22  
Child safety feature . . . . . . . . . . . . . . .28, 37  
Coloureds . . . . . . . . . . . . . . . . . . . . . . . .11, 24  
Conditioner . . . . . . . . . . . . . . .10, 16, 17, 19  
Cottons . . . . . . . . . . . . . . . . . . . . . . 11, 15, 24  
Curtains . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Customer Service . . . . . . . . . . . . . 27, 28, 51  
Rating plate . . . . . . . . . . . . . . . . . .10, 43, 51  
Rinse hold . . . . . . . . . . . . . . . . . . . .12, 21, 23  
Rinse+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36  
Risk of frost . . . . . . . . . . . . . . . . . . . . . . 6, 33  
S
Silk . . . . . . . . . . . . . . . . . . . . . . . . . .12, 15, 25  
Softener . . . . . . . . . . . . . . . . . . . . . . . . 10, 19  
Spinning . . . . . . . . . . . . . .12, 17, 21, 22, 25  
Stain . . . . . . . . . . . . . . 9, 13, 20, 22, 24, 32  
D
Delicates . . . . . . . . . . . . . . . . . . . . . 12, 15, 24  
Detergent . . . . . . . . . . . . . . . . .10, 16, 17, 19  
Detergent dispenser drawer . . . . . . . . .10, 19  
Drain . . . . . . . . . . . . . . . . . . . . . . . . 12, 22, 23  
Drain pump . . . . . . . . . . . . . . . . . . . . . .10, 34  
W
Warranty . . . . . . . . . . . . . . . . . . . . . .6, 28, 47  
Washing  
coloureds . . . . . . . . . . . . . . . . . . . . . . . . .14  
lightly soiled . . . . . . . . . . . . . . . . . . . . . . . .9  
normally dirty . . . . . . . . . . . . . . . . . . . . . . .9  
Water  
hardness . . . . . . . . . . . . . . . . . . . . . . . 9, 16  
softener . . . . . . . . . . . . . . . . . . . . .9, 16, 19  
Wool . . . . . . . . . . . . . . . . . . . . 12, 15, 24, 25  
hand washable . . . . . . . . . . . . . . . . . 12, 24  
E
Easy iron . . . . . . . . . . . . . . . . . . . . . . . . .12, 24  
Easy-cares . . . . . . . . . . . . . . . . . . . 11, 15, 24  
Eco-sluice . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Emergency drainage . . . . . . . . . . . . . . . . . . 33  
Energy saving . . . . . . . . . . . . . . . . . . . . . . . 12  
G
Gentle rinse . . . . . . . . . . . . . . . . . . . . . .12, 25  
H
Handwash . . . . . . . . . . . . . . . . . . . 12, 24, 25  
I
In-wash stain treatment . . . . . . . . . . . . . . 10  
L
Linen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Load . . . . . . . . . . . . . . . . . . . . . . . . . . . .13, 24  
N
Net curtains . . . . . . . . . . . . . . . . . . . . . . . . . 24  
O
Opening the door . . . . . . . . . . . . . . . . .18, 30  
P
Pre-wash . . . . . . . . . . . . . . . . .12, 19, 20, 24  
detergent . . . . . . . . . . . . . . . . . . . . . .10, 19  
Programme progress display . . . . . . . . . . . 21  
Q
Quick . . . . . . . . . . . . . . . . . . . .13, 20, 22, 24  
50  
 
Service  
Service  
In the chapter "What to do if...“ , some faults are listed which you can  
remedy yourself. Look there first if a fault occurs. If you do not find any  
information there, please consult your Customer Service. (You can find  
the addresses and telephone numbers in the section "Customer Service  
Centres.)  
Always prepare in advance for the discussion. By doing so you will sim-  
plify the diagnosis and the decision on whether customer service is  
necessary.  
Note the PNC number and  
S. number. You will find both on the  
rating plate on the inside of the door  
of your washing machine.  
PNC .....................................................  
S. No. .....................................................  
Answer as precisely as possible:  
What form does the fault take?  
Under what circumstances does the fault occur?  
When do you incur costs even during the warranty period?  
If you could have remedied the fault yourself with the aid of the fault  
table (see the section "What to do if..."),  
If several journeys by the customer service technician are necessary  
because for example he did not receive all the important information  
before his visit and must collect spare parts. These multiple trips can  
be avoided if you prepare your phone call as described above.  
51  
 
From the Electrolux Group. The world´s No.1 choice.  
The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor  
use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,  
vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more  
than 150 countries around the world.  
AEG Hausgeräte GmbH  
Postfach 1036  
D-90327 Nürnberg  
© Copyright by AEG  
822 943 843-01-180703-01  
Subject to change without notice  
 

Acnodes Computer Monitor RM 6190N User Manual
Agri Fab Snow Blower 45 0418 ATV User Manual
Alamo Lawn Mower 02988075P User Manual
AlphaShield Network Card FIREWALL User Manual
Aluratek Clock Radio AIRMM02F User Manual
Amana Furnace GUD X User Manual
American Standard Indoor Furnishings 0478001 User Manual
ATK Motorcycles Motorcycle 2008 450 User Manual
Barco Home Theater System HDK 2K40 User Manual
Beko Hot Beverage Maker BKK2213 User Manual