Advantek Networks Switch ANS 800P User Manual

8 Port 10/100/1000Mbps Gigabit  
Switch  
Quick Installation Guide  
Model# ANS-800P  
 
General Description  
Advantek Networks ANS-800P is a high-performance Gigabit Ethernet Switch with all 8 ports  
capable of 10, 100 and 1000Mbps auto-negotiation operation. The Gigabit switching hub  
supports Quality of Service (QoS), 8021Q and RMON counters. All ports support IEEE  
802.1Q VLAN, Spanning Tree and isolated WAN vs. LAN firewall applications.  
The Gigabit switching hub provides non-blocking switching performance in all traffic  
environment that all packets are directed into one of four traffic class queues based upon port,  
IEEE 802.1p, Ipv4’s TOS or Diff-Serv, Ipv6’s Traffic Class, 802.1Q VID, DA MAC address or  
SA MAC address. Back-pressure and pause frame-based flow control schemes are included  
to support zero packet loss under temporary traffic congestion.  
Product Features  
Supports Auto MDIX.  
Fixed priority & programmable weighted fair queuing.  
Compliant with IEEE 802.3, IEEE 802.3u, and IEEE 802.3x.  
Supports Store-and-forward operation.  
Each port works at 10 Mbps or 100 Mbps, full or half duplex mode.  
Automatic speed and duplex communication between the  
Back-pressure flow control on half duplex ports & Pause-ports.  
Shared 1 Mbit on-chip memory-based switch fabric performance.  
Embedded 128K Byte SRAM for packet buffer.  
Supports port-based trunking for high-bandwidth links.  
Package contents  
One 8 Port Gigabit switching hub  
One 12V 1.5A DC adapter  
One 8 Port Gigabit Switching Hub User’s Quick Guide  
*
If any of the items is damaged or missing, please contact your retailer immediately.  
 
Front panel LED indicators  
After installing the switch, you can check its status from the LED indicators on the front panel  
shown below.  
Front View  
Rear panel ports  
Back Panel  
Ports 1x - 8x :The switch has eight 10/100/1000Mbps RJ-45 ports where you can connect  
computers or network devices to the switch.  
Power Connecting  
Plug the circle end of the power adapter firmly into the power port on the switch rear panel, and  
the other end into an electric service outlet, then the system is ready.  
Connecting computers to the switch  
The switch features auto-MDI/MDIX crossover detection function and provides plug-and-play  
capability. Users can immediately use any of the features of this product simply by plugging the  
network cables (RJ-45) into the computers and the switch.  
 
Uplink  
All Ports can be used as an uplink port for connecting to another unit without using crossover  
cable. When using the uplink port, you can extend the distance to 100m for linking another switch  
or hub.  
To prolong the operational life of your units  
*Never stack units more than eight high if freestanding  
*Do not place objects on top of any unit or stack  
*Do not obstruct any vents at the sides of the case  
*Use only the AC power adapter that came with the  
switch to prevent damage to the unit.  
 

3M Cable Box 530 User Manual
Aastra Telecom IP Phone 9133i User Manual
ADC Switch DSX 3 User Manual
ADTRAN Switch 1224ST User Manual
Agri Fab Spreader PRO 125 User Manual
Amcor Refrigerator WV 50 User Manual
American DJ CD Player PRO DJ1 User Manual
American Dryer Corp Clothes Dryer AD 75D II User Manual
AO Smith Water Heater IT 1000 User Manual
Avery Label Maker ALS 230 User Manual