Patch Release Note
Patch 86222-10
For Rapier Switches and AR800 Series
Modular Switching Routers
Introduction
This patch release note lists the issues addressed and enhancements made in
patch 86222-10 for Software Release 2.2.2 on existing models of Rapier L3
managed switches and AR800 Series L3 modular switching routers. Patch file
Table 1: Patch file details for Patch 86222-10.
86s-222.rez
Base Software Release File
Patch Release Date
29-Nov-2001
86222-10.paz
295536 bytes
Compressed Patch File Name
Compressed Patch File Size
This release note should be read in conjunction with the following documents:
■
Release Note: Software Release 2.2.2 for Rapier Switches, AR300 and
AR700 Series Routers, and AR800 Series Modular Switching Routers
(Document Number C613-10313-00 Rev A) available from
■
■
Rapier Switch Documentation Set for Software Release 2.2.1 available on
the Documentation and Tools CD-ROM packaged with your switch, or
AR800 Series Modular Switching Router Documentation Set for Software
Release 2.2.1 available on the Documentation and Tools CD-ROM
packaged with your switching router, or from www.alliedtelesyn.co.nz/
WARNING: Using a patch for a different model or software release may cause
unpredictable results, including disruption to the network. Information in this
release note is subject to change without notice and does not represent a
commitment on the part of Allied Telesyn International. While every effort has
been made to ensure that the information contained within this document and
the features and changes described are accurate, Allied Telesyn International
can not accept any type of liability for errors in, or omissions arising from the
use of this information.
Simply connecting the world
Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers
3
PCR: 01248
Module: SWI
Network affecting: No
A configuration problem prevented trunking of gigabit ports at 100Mbit
speeds. This issue has been resolved. The A39 gigabit copper uplink
reverted to autonegotiation after a restart, even if it was configured to a
fixed speed. This issue has been resolved. When the port has been
configured for a fixed speed, the mode is now set to MDIX, not MDI.
PCR: 01254
Module: PRI
Network affecting: No
When an M2 version of the AR020 PRI E1/T1 PIC was installed in a AR040
NSM it was not possible to select the T1 mode of operation regardless of the
jumper setting. This issue has been resolved.
PCR: 01256
Module: Firewall
Network affecting: No
A fatal error occurred when the firewall discarded disallowed multicast
packets. This issue has been resolved.
Features in 86222-08
Table 3: Patch file details for Patch 86222-08.
86s-222.rez
Base Software Release File
Patch Release Date
09-Nov-2001
86222-08.paz
291012 bytes
Compressed Patch File Name
Compressed Patch File Size
Patch 86222-08 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
PCR: 01201
Module: L2TP
Network affecting: Yes
Tunnel creation failed when attempting to establish a point-to-point tunnel
from an ATR router (tunnel originator) to another vendor’s router. This
issue has been resolved.
PCR: 01233
Module: PIM
Network affecting: No
When IGMP snooping was enabled, if a member left a group on a port, it
could not re-join the group on that port. This issue has been resolved.
Substantial changes have been made to PIM in more recent code releases.
These have been retrofitted to 2-2-2 in the patch. Note: these changes have
incorporated PCRs 01159 and 01190.
PCR: 01236
Module: PPP
Network affecting: No
The PPPoE access concentrator did not stop RADIUS accounting when a
PADT termination was received without receiving a proper PPP
termination first. This issue has been resolved.
Patch 86222-10 for Software Release 2.2.2
C613-10319-00 REV J
4
Patch Release Note
PCR: 01237
Module: SWI
Network affecting: No
The dot1dBridge MIB implementation now complies with RFC1493.
Features in 86222-07
Patch file details for Patch 86222-07 are listed in Table 4:
Table 4: Patch file details for Patch 86222-07
86s-222.rez
Base Software Release File
Patch Release Date
26-Oct-2001
86222-07.paz
250468 bytes
Compressed Patch File Name
Compressed Patch File Size
Patch 86222-07 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
PCR: 01018
Module: DHCP
Network affecting: No
DHCP now correctly handles request messages containing request list
options not supported by the router.
PCR: 01160
Module: IPG,FIREWALL
Network affecting: No
The router would accept TCP sessions with destination address the same as
the subnet broadcast address for one of the router’s interfaces. Firewall-
generated packets destined for a subnet broadcast address on one of the
routers interfaces would cause a fatal error. These issues have been
resolved.
PCR: 01168
Module: HTTP
Network affecting: No
A watchdog timout occurred when the router received an HTTP message
with an over-length header. Normal HTTP requests would also occasionally
cause watchdog timeouts. These issues have been resolved.
PCR: 01182
Module: OSPF
Network affecting: No
The OSPF route filter was not filtering out external routes. This issue has
been resolved.
PCR: 01193
Module: IPG
Network affecting: No
MD5 Authentication now works correctly with RIP packets.
PCR: 01194
Module: L2TP, IPG
Network affecting: No
The SET IP LOCAL command caused a fatal error if the router was
configured with a default route over an L2TP tunnel, because there was no
valid route to the remote IP address of the tunnel. This issue has been
resolved.
Patch 86222-10 for Software Release 2.2.2
C613-10319-00 REV J
Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers
5
PCR: 01197
Module: Q931
Network affecting: No
Debug messages are no longer generated when a Q.931 Advise of Charge
Notification message is received.
PCR: 01198
Module: TCP
Network affecting: No
TCP sessions would get stuck in the FINWAIT2 state if the remote host did
not send a FIN message when required. The router now starts a timer when
a TCP session enters the FINWAIT2 state and will automatically close the
session if the timer expires.
PCR: 01199
Module: IPG
Network affecting: No
The SET IP FILTER command was not correctly handling the ICMPTYPE
and ICMPCODE parameters. This issue has been resolved.
PCR: 01202
Module: DHCP
Network affecting: No
The router will now accept DHCP messages that are greater than or equal
to 576 bytes in size, and reject any message smaller than 576 bytes. This
operation conforms to RFC 1541.
PCR: 01203
Module: ISAKMP
Network affecting: No
ISAKMP quick mode exchanges are now committed if any traffic is received
over the newly generated SA. This improves stability in very lossy networks
where the commit message may get lost.
PCR: 01204
Module: ISAKMP
Network affecting: No
ISAKMP debugging caused a fatal error when the debugging mode was set
to ALL and PFS was enabled. This issue has been resolved.
PCR: 01205
Module: PPP
Network affecting: No
PPPoE interfaces with IDLE set to ON would not retry active discovery
when more data was received if active discovery had previously failed. This
issue has been resolved.
PCR: 01206
Module: ISAKMP
Network affecting: No
A memory loss occurred when certificates were used by ISAKMP. This issue
has been resolved.
PCR: 01207
Module: ISAKMP
Network affecting: No
ISAKMP heartbeats are no longer transmitted if the lower layer interface is
down. This stops ISAKMP heartbeats from bringing up links in dial-up
environments.
PCR: 01209
Module: ISAKMP
Network affecting: No
In some conditions it was possible for ISAKMP packets to be lost and not
retransmitted. Incoming ISAKMP messages are now validated before
stopping retransmission of the previous message.
PCR: 01211
Module: SWI
Network affecting: No
The COS_DST bit on ARL for L3 interface should be 0x4 (higher priority) for
CPU ports. This has been corrected.
Patch 86222-10 for Software Release 2.2.2
C613-10319-00 REV J
6
Patch Release Note
PCR: 01213
Module: TRG, SNMP
Network affecting: No
The Trigger Facility was generating a trap with variable { 0 0 }, and was not
documented in the ATI enterprise MIB. This issue has been resolved. The
MIB object triggerLastTriggerActivated ({ enterprises(1) alliedTelesyn(207)
mibObjects(8) brouterMib(4) atrouter(4) modules(4) trigger(53) 1 }) has been
defined, to record the trigger number of the last trigger activated, and this
variable is now transmitted in the trigger activation trap triggerTrap.
PCR: 01214
Module: SWI
Network affecting: No
In a Rapier G6, fitted with a fibre uplink module with all ports active,
switching traffic between port 1 and the uplink caused the traffic flow to
cease after a period of time depending on the volume of traffic. This issue
has been resolved.
PCR: 01216
Module: STP
Network affecting: No
The Rapier did not include the message age of the received BDPU message
in the message age of the BDPU it transmitted. Also, the message age of the
message transmitted BDPU could be less than that of the received BDPU,
which contravenes IEEE 802.3d. This issue has been resolved.
PCR: 01219
Module: VLAN,SWI
Network affecting: No
Reception of incorrectly tagged packets was causing corruption of the ARL
table, eventually causing the switch to lock up. This issue has been resolved.
Tagged packets with invalid VLAN identifiers are now discarded. The
INFILTERING parameter of the SET SWITCH PORT command now
defaults to ON.
PCR: 01221
Module: SWI
Network affecting: No
Flow control performance has been improved.
PCR: 01225
Module: IPSEC
Network affecting: No
The IPsec SA ID now wraps correctly at the 16 bit (ID = 65535) boundary.
The ID is also checked to verify that it is free before it is used.
PCR: 01227
Module: PPP
Network affecting: No
If PPPoE AC services were not deleted in the same order they were added,
the DELETE command would return an “ operation successful” message
but the service would still appear in the output of the SHOW PPP PPPOE
command. This issued has been resolved.
PCR: 01229
Module: SWI
Network affecting: No
The CREATE CONFIG command did not include all required L3FILTER
parameters in the generated script file.
PCR: 01232
Module: SWI
Network affecting: No
The L3 table on the Rapier G6 is now cleared when a switch port goes down
to ensure the L3 and ARP tables are consistent.
Patch 86222-10 for Software Release 2.2.2
C613-10319-00 REV J
Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers
7
PCR: 01234
Module: SWI
Network affecting: No
A switch port that was transmitting STP BPDUs and also mirroring its
transmit traffic to the mirror port caused a fatal error. This issue has been
resolved.
Features in 86222-06
Table 5: Patch file details for Patch 86222-06.
86s-222.rez
Base Software Release File
Patch Release Date
30-Aug-2001
86222-06.paz
226776 bytes
Compressed Patch File Name
Compressed Patch File Size
Patch 86222-06 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
PCR: 01188
Module: SWI
Network affecting: No
The power supply voltages of the base board PHYs on a Rapier G6 are
controlled by a PHY register value, which was incorrectly set. This issue has
been resolved.
PCR: 01190
Module: PIM
Network affecting: No
In PIM Dense Mode, if a data stream started before PIM hello messages
were exchanged, the receiver did not get the data stream. This issue has
been resolved.
PCR: 01192
Module: SWI
Network affecting: No
The Rapier G6 base ports sometimes experienced spurious link up or link
down events. This issue has been resolved.
Features in 86222-05
Table 6: Patch file details for Patch 86222-05.
86s-222.rez
Base Software Release File
Patch Release Date
24-Aug-2001
86222-05.paz
223728 bytes
Compressed Patch File Name
Compressed Patch File Size
Patch 86222-05 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
Patch 86222-10 for Software Release 2.2.2
C613-10319-00 REV J
8
Patch Release Note
PCR: 01148
Module: SWI
Network affecting: No
A39 copper uplink modules in the Rapier G6 sometimes experienced
spurious link up or link down events. This issue has been resolved.
PCR: 01157
Module: CORE
Network affecting: No
The enterprise MIB now supports objects for power supply monitoring.
PCR: 01162
Module: PKI
Network affecting: No
Certificates containing GeneralisedTime with the year in YYYY format are
now parsed correctly. The keyUsage field of certificates is now parsed
correctly when only one byte has been specified. The CRL update time is now
displayed correctly in hours. If the username and password parameters are
present the location parameter must be present and appear before the
username and password parameters. Certificates with signatures of 257 bytes
are now correctly parsed. Certificates added from a configuration script are
now processed correctly.
PCR: 01170
Module: IPv6
Network affecting: No
A fatal error occurred if an IPv6 interface was deleted while packets were
being transmitted. The number of current interfaces was not being updated
correctly when a new IPv6 interface was added. As a result, after multiple
additions and deletions, no more IPv6 interfaces could be added. These
issues have been resolved.
PCR: 01176
Module: PKI
Network affecting: No
The CREATE CONFIG command now adds PKI certificates to the script in
the same order that they were originally added to the certificate database.
PCR: 01177
Module: PKI
Network affecting: No
PKI certificates are now periodically checked (once per hour) to verify that
they are still valid.
PCR: 01178
Module: IPSEC
Network affecting: No
IPCOMP SA’s which have the reserved CPI “3” are no longer deleted by
ISAKMP delete messages.
PCR: 01179
Module: SWI
Network affecting: No
When a VLAN was created and then destroyed on the G6 or G6F, the
VTABLE was corrupted. This has been fixed.
PCR: 01181
Module: DHCP
Network affecting: No
DHCP failed to send request messages when it was in a rebinding or
renewing state. This issue has been resolved.
PCR: 01185
Module: SWI
Network affecting: No
In some extreme traffic conditions the switch could lock up, preventing
switching of any traffic. This issue has been resolved.
Patch 86222-10 for Software Release 2.2.2
C613-10319-00 REV J
Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers
9
PCR: 01186
Module: FIREWALL
Network affecting: No
When large numbers of sessions were being handled the firewall would
become overly aggressive in restricting new sessions. The Active TCP Opens
field in the output of the SHOW FIREWALL POLICY would show a very
8
high number (42 × 10 ). This issue has been resolved.
PCR: 01187
Module: IPG
Network affecting: No
If the IGMP table was empty and a timeout was set, a fatal error occurred.
This issue has been resolved.
Features in 86222-04
Table 7: Patch file details for Patch 86222-04.
86s-222.rez
Base Software Release File
Patch Release Date
24-Aug-2001
86222-04.paz
220220 bytes
Compressed Patch File Name
Compressed Patch File Size
Patch 86222-04 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
PCR: 01124
Module: PKI
Network affecting: No
Message protection validation failures would occur intermittently. This
issue has been resolved.
PCR: 01136
Module: ISAKMP
Network affecting: No
ISAKMP now interoperates with other vendor’s products in aggressive
mode exchanges.
PCR 01138
Module: CORE, SWI
Network affecting: No
Support has been added for the 8624XL-80 switch with -48VDC power
supply.
PCR: 01152
Module: FIREWALL
Network affecting: No
In a dual policy configuration, the firewall would lock up under load. The
firewall would also mistakenly report SYN attacks. These issues have been
resolved.
PCR: 01159
Module: PIM
Network affecting: No
The CREATE CONFIG command generated duplicate PIM interface
configuration command lines. This issue has been resolved.
PCR: 01162
Module: PKI
Network affecting: No
Certificates containing GeneralisedTime with the year in YYYY format are
now parsed correctly. The keyUsage field of certificates is now parsed
Patch 86222-10 for Software Release 2.2.2
C613-10319-00 REV J
10
Patch Release Note
correctly when only one byte has been specified. The CRL update time is now
displayed correctly in hours. If the username and password parameters are
present the location parameter must be present and appear before the
username and password parameters.
PCR: 01165
Module: DHCP
Network affecting: No
The DHCP server now correctly allocates addresses to clients running
Apple Open Transport 2.5.1 or 2.5.2.
PCR: 01166
Module: FIREWALL
Network affecting: No
Both public and private access could be configured on the same interface on
a policy. This issue has been resolved.
PCR: 01167
Module: ENCO
Network affecting: No
RSA encryption is now periodically suspended to ensure other processes
get some CPU time during large RSA calculations.
PCR: 01169
Module: ISAKMP
Network affecting: No
The CREATE ISAKMP command now checks that the key specified by the
LOCALRSAKEY parameter actually exists in the ENCO module.
PCR: 01171
Module: ETH, TRIGGER
Network affecting: No
The INTERFACE parameter of the CREATE TRIGGER and SET TRIGGER
commands now supports Ethernet interfaces. Ethernet interface events can
now generate triggers.
PCR: 01173
Module: Telnet
Network affecting: No
The Telnet server’s listen port can now be configured to a number in the
range 1 to 65535, excluding any ports already assigned as listen ports.
PCR: 01174
Module: Firewall
Network affecting: No
The CREATE CONFIG command sometimes generated scripts for rule
commands with GBLIP=0.0.0.0 when this was not necessary. This issue has
been resolved.
Features in 86222-03
Table 8: Patch file details for Patch 86222-03.
86s-222.rez
8-Aug-2001
86222-03.paz
205828 bytes
Base Software Release File
Patch Release Date
Compressed Patch File Name
Compressed Patch File Size
Patch 86222-03 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
Patch 86222-10 for Software Release 2.2.2
C613-10319-00 REV J
Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers
11
PCR: 01112
Module: IPG
Network affecting: No
DNS response packets with corrupt length fields were causing a fatal error.
This issue has been resolved.
PCR: 01139
Module: IPG
Network Affecting: No
IP NAT caused a fatal error when an ARP wait timer timed out and tried to
send a host unreachable message. This issue has been resolved.
PCR: 01147
Module: STT
Network affecting: No
The router was restarting after a “teardrop” attack on the STT listen port.
This issue has been resolved.
PCR: 01150
Module: FIREWALL
Network affecting: No
The entry aging process now works correctly even when there are large
numbers of firewall entries to be aged.
PCR: 01153
Module: IPG
Network affecting: No
The command SHOW IP DEBUG=n was entered, where n was one greater
than the number of items in the IP debug queue resulted in a fatal error. This
issue has been resolved.
Features in 86222-02
Table 9: Patch file details for Patch 86222-06.
86s-222.rez
26-Jul-2001
86222-02.paz
202564 bytes
Base Software Release File
Patch Release Date
Compressed Patch File Name
Compressed Patch File Size
Patch 86222-02 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
PCR: 01081
Module: FIREWALL
Network affecting: No
When an interface on the firewall was configured with a global IP address
of 0.0.0.0, outgoing packets from the private interface to the public interface
sometimes caused a fatal error. This issue has been resolved.
PCR: 01126
Module: PKI
Network affecting: No
Re-validation of temporary CA certificates now works correctly.
PCR: 01128
Module: IPG
Network affecting: No
A fatal error occurred when IGMP received a Join message and attempted
to forward the Join message to other switch ports. This issue has been
resolved.
Patch 86222-10 for Software Release 2.2.2
C613-10319-00 REV J
12
Patch Release Note
PCR: 01131
Module: CORE
Network affecting: No
The SHOW CPU command sometimes displayed incorrect CPU utilisation
figures. Typically a value of about 74% was reported when in fact the CPU
was almost idle. This issue has been resolved.
PCR: 01134
Module: GUI
Network affecting: No
Port parameters can now be set correctly using the Layer 3 Switch GUI.
PCR: 01135
Module: GUI,INST
Network affecting: No
Clicking the Apply button on a Layer 3 Switch GUI page caused the switch
to lock up if no configuration file was set, but boot.cfg was present. This
issue has been resolved.
PCR: 01137
Module: IPG
Network affecting: No
A fatal error occurred when UDP received a packet with very long UDP
packet length. This issue has been resolved.
Features in 86222-01
Patch file details for Patch 86222-01 are listed in Table 10.
Table 10: Patch file details for Patch 86222-01.
86s-222.rez
11-Jul-2001
86222-01.paz
187124 bytes
Base Software Release File
Patch Release Date
Compressed Patch File Name
Compressed Patch File Size
Patch 86222-01 includes the following enhancement for Software Release 2.2.2:
PCR: 01100 Module: DHCP Network affecting: No
The DHCP server identified the wrong port numbers for incoming DHCP
requests causing DHCP replies to be sent to the wrong port. This issued has
been resolved.
PCR: 01102
Module: IPG
Network affecting: No
The IP flow cache occasionally generated a watchdog fatal error. This issued
has been resolved.
PCR: 01102
Module: SWI
Network affecting: No
Deleting entries from an L3 table occasionally resulted in a watchdog fatal
error. This issued has been resolved.
PCR: 01106
Module: PKI
Network affecting: No
PKI enrolment no longer causes message validation to fail.
Patch 86222-10 for Software Release 2.2.2
C613-10319-00 REV J
Patch 86222-10 For Rapier Switches and AR800 Series Modular Switching Routers
13
PCR: 01119
Module: IPV6
Network affecting: No
Repeated addition and deletion of an address with the VALID parameter set
to or from an IPV6 interface caused a fatal error. This issue has been
corrected. The VALID parameter specifies the life of the address, and
defaults to INFINITE. The address is deleted when the lifetime expires. The
PREF parameter specifies the time that the address is the preferred address
of the interface, and defaults to INFINITE. PREF must be less than or equal
to VALID. IPV6 now checks and ensures that if either PREF or VALID is
specified, PREF is less than or equal to VALID. When an address is deleted
the timers are now correctly cleared.
PCR: 01120
Module: IPG
Network affecting: No
IP sometimes passed the wrong port number to PIM, causing PIM to
process the wrong port number in its routing table. This issued has been
resolved.
Availability
Patches can be downloaded from the Software Updates area of the Allied
licence or password is not required to use a patch.
Patch 86222-10 for Software Release 2.2.2
C613-10319-00 REV J
14
Patch Release Note
Patch 86222-10 for Software Release 2.2.2
C613-10319-00 REV J
|