Alpine Cassette Player TDM 7586RB User Manual

R
EN  
DE  
FR  
ES  
IT  
TDM-7586RB  
TDM-7584R  
TDM-7582R  
FM/MW/LW/RDS Cassette Receiver  
• OWNER'S MANUAL  
Please read before using this equipment.  
• BEDIENUNGSANLEITUNG  
Lesen Sie diese Bedienungsanleitung bitte vor  
Gebrauch des Gerätes.  
• MODE D'EMPLOI  
Veuillez lire avant d'utiliser cet appareil.  
• MANUAL DE OPERACIÓN  
Léalo antes de utilizar este equipo.  
• ISTRUZIONI PER L'USO  
Si prega di leggere prima di utilizzare il  
attrezzatura.  
• ANVÄNDARHANDLEDNING  
Innan du använder utrustningen bör du läsa  
igenom denna användarhandledning.  
ALPINE ELECTRONICS, INC.  
Tokyo office: 1-1-8 Nishi Gotanda,  
Shinagawa-ku,  
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.  
6-8 Fiveways Boulevarde Keysborough,  
Victoria 3173, Australia  
ALPINE ELECTRONICS FRANCE S.A.R.L.  
(RCS PONTOISE B 338 101 280)  
98, Rue De La Belle Etoile, Z.I. Paris Nord Il  
B.P. 50016 F-95945, Roissy, Charles De Gaulle  
Cedex, France  
Tokyo 141-8501, Japan  
Tel.: (03) 3494-1101  
Tel.: (03) 9769-0000  
ALPINE ELECTRONICS GmbH  
Kreuzerkamp 7-11 40878 Ratingen, Germany  
Tel.: 02102-45 50  
Tel.: 01-48 63 89 89  
ALPINE ELECTRONICS OF AMERICA, INC.  
19145 Gramercy Place, Torrance,  
California 90501, U.S.A.  
SE  
ALPINE ELECTRONICS OF U.K., LTD.  
13 Tanners Drive, Blakelands, Milton Keynes  
MK14 5BU, U.K.  
ALPINE ITALIA S.p.A.  
Via C. Colombo 8, 20090 Trezzano Sul Naviglio  
MI, Italy  
Tel.: 1-800-ALPINE-1 (1-800-257-4631)  
Tel.: 01908-61 15 56  
ALPINE ELECTRONICS OF CANADA, INC.  
Suite 203, 7300 Warden Ave. Markham,  
Ontario L3R 9Z6, Canada  
Tel.: 02-48 47 81  
ALPINE ELECTRONICS DE ESPAÑA, S.A.  
Portal De Gamarra 36, Pabellón 32  
01013 Vitoria (Alava)-Apdo. 133, Spain  
Tel.: 34-45-283588  
Tel.: 1-800-ALPINE-1 (1-800-257-4631)  
Designed by ALPINE Japan  
Printed in China (Y)  
68P01434K82-O  
Melyi Printing Factory, Dalian, China  
No. 28 Chang Qing Street, Xl Gang District, Dalian, China  
 
ENGLISH  
Contents  
Operating Instructions  
Cassette Player Operation  
Inserting/Ejecting Cassette ..............................11  
Normal Play and Pause ....................................11  
Dolby B NR (Noise Reduction)  
WARNING  
(TDM-7586RB/TDM-7584R only)..............11  
Repeat Play ......................................................11  
Blank Skip (B.SKIP)........................................11  
Fast Forward and Rewind ................................12  
Scanning Programmes .....................................12  
Manual Reverse ...............................................12  
Programme Sensor (P.S.) .................................12  
WARNING.................................................. 2  
CAUTION ................................................... 2  
PRECAUTIONS ......................................... 2  
Basic Operation  
Detaching the Front Panel..................................4  
Attaching the Front Panel ..................................4  
Initial System Start-Up ......................................4  
Turning Power On and Off ................................5  
Non Fading Pre-Out (N.F.P.) On and Off  
CD Changer Operation  
Controlling CD Changer (Optional) ................13  
Music Sensor (M.S.) Skip ................................13  
Fast Forward and Backward ............................13  
Repeat Play on Single Track or Entire Disc ....14  
M.I.X. (Random) Play .....................................14  
Scanning programmes......................................14  
To Display CD Titles (TDM-7586RB/  
(TDM-7586RB/TDM-7584R only)................5  
Adjusting Source Signal Levels .........................5  
Adjusting Volume/Bass/Treble/Balance  
(Between Left and Right Channels)/Fader  
TDM-7584R only)........................................15  
Titling Discs (TDM-7586RB/TDM-7584R  
only)..............................................................15  
Erasing Disc Title (TDM-7586RB/TDM-7584R  
only)..............................................................15  
(Between Front and Rear Speakers) ...............5  
Turning Loudness On/Off ..................................5  
Radio Operation  
Manual Tuning ...................................................6  
Automatic Seek Tuning .....................................6  
Manual Storing of Station Presets .....................6  
Automatic Memory of Station Presets ...............7  
Tuning to Preset Stations ...................................7  
Remote Control Operation  
(TDM-7586RB/TDM-7584R only)  
Controls on Remote Control ............................16  
Battery Replacement ........................................17  
Information  
RDS Operation  
In Case of Difficulty ........................................18  
Specifications ...................................................19  
Setting RDS Reception Mode and Receiving  
RDS Stations ..................................................8  
Recalling Preset RDS Stations...........................8  
Turning Emergency Alarm On or Off ................9  
Receiving Traffic Information............................9  
PTY (Programme Type) Tuning ........................9  
Receiving Traffic Information While Playing  
Tape or Radio .................................................9  
Priority News ...................................................10  
Receiving RDS Regional (Local) Stations ......10  
Installation and Connections  
WARNING.......................................................20  
CAUTION........................................................20  
Precautions .......................................................20  
Installation .......................................................21  
Connections .....................................................22  
* Dolby noise reduction manufactured under license from  
Dolby Laboratories Licensing Corporation. "DOLBY" and  
the double-D symbol are trademarks of Dolby Laborato-  
ries Licensing Corporation.  
1-EN  
 
WARNING  
WARNING  
CAUTION  
The exclamation point within an equilateral  
triangle and "WARNING" are intended to alert the  
user to the presence of important operating  
instructions.  
The exclamation point within an equilateral  
triangle and "CAUTION" are intended to alert the  
user to the presence of important operating  
instructions.  
Failure to heed the instructions will result in  
severe injury or death.  
Failure to heed the instructions can result in injury  
or material damage.  
DO NOT DISASSEMBLE OR ALTER.  
Doing so may result in an accident, fire or electric shock.  
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.  
Failure to do so may cause personal injury or damage to  
the product. Return it to your authorized Alpine dealer or  
the nearest Alpine Service Centre for repairing.  
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT  
OF THE REACH OF CHILDREN.  
DO NOT MIX NEW BATTERIES WITH OLD  
Swallowing them may result in serious injury. If  
swallowed, consult a physician immediately.  
BATTERIES. INSERT WITH THE CORRECT BATTERY  
POLARITY.  
USE THE CORRECT AMPERE RATING WHEN  
When inserting the batteries, be sure to observe proper  
polarity (+ and –) as instructed. Rupture or chemical  
leakage from the battery may cause fire or personal injury.  
REPLACING FUSES.  
Failure to do so may result in fire or electric shock.  
DO NOT OPERATE ANY FUNCTION THAT TAKES  
YOUR ATTENTION AWAY FROM SAFELY DRIVING  
YOUR VEHICLE.  
Any function that requires your prolonged attention  
should only be performed after coming to a complete stop.  
Always stop the vehicle in a safe location before  
performing these functions. Failure to do so may result in  
an accident.  
PRECAUTIONS  
Temperature  
Be sure the temperature inside the vehicle is between  
+60°C (+140°F) and –10°C (+14°F) before turning your  
unit on.  
Tape Slack  
Check and make sure any slack in the tape is taken up  
before inserting the tape into the unit. A loose tape can get  
caught in the mechanism and cause damage to the unit  
and the tape itself. Tighten the tape by inserting a pencil  
or a similar instrument into the spindle hole and turn until  
all the slack has been taken up.  
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN  
STILL HEAR OUTSIDE NOISE WHILE DRIVING.  
Failure to do so may result in an accident.  
USE THIS PRODUCT FOR MOBILE 12V  
APPLICATIONS.  
Use for other than its designed application may result in  
fire, electric shock or other injury.  
DO NOT PLACE HANDS, FINGERS OR FOREIGN  
OBJECTS IN INSERTION SLOTS OR GAPS.  
Doing so may result in personal injury or damage to the  
product.  
Excessively Thin Tape  
DO NOT BLOCK VENTS OR RADIATOR PANELS.  
Doing so may cause heat to build up inside and may result  
in fire.  
C-120 type cassette tapes are not recommended for use in  
automobile tape players.  
2-EN  
 
Precision Tape Mechanism  
Prevent any foreign objects from entering the cassette  
opening as the precision mechanism and tape head may be  
damaged.  
Never play dirty or dusty tapes they can damage the tape  
head.  
Tape Head Cleaning  
Periodic cleaning (approximately every 20 hours of use)  
of the tape head with a wet type head-cleaning cassette  
tape (available at audio stores) is necessary for best  
performance.  
Fuse Replacement  
When replacing the fuse(s), the replacement must be of  
the same amperage as shown on the fuse holder. If the  
fuse blows more than once, carefully check all electrical  
connections for shorted circuitry. Also have your vehicle's  
voltage regulator checked.  
Maintenance  
If you have problems, do not attempt to repair the unit  
yourself. Return it to your Alpine dealer or the nearest  
Alpine Service Station for servicing.  
Installation Location  
Make sure the TDM-7586RB/TDM-7584R/TDM-7582R  
will not be installed in a location subjected to:  
Direct sun and heat  
High humidity and water  
Excessive dust  
Excessive vibrations  
Handling the Detachable Front Panel  
Do not expose to rain or water.  
Do not drop or apply shock.  
3-EN  
 
Basic Operation  
2
c
POWER/SETUP  
MODE/LOUD  
1
1
Detaching the Front Panel  
Connectable to Remote Control Interface  
Box  
You can operate this unit from the vehicle's  
control unit when an Alpine Remote Control  
Interface Box (optional) is connected. For  
details, contact your Alpine dealer.  
1
2
Press the POWER button to turn off the power.  
Press the (Release) button until the front  
panel pops out.  
3
Grasp the left side of the front panel and pull it  
out.  
Initial System Start-Up  
Immediately after installing or applying power to  
the unit, it should be initialized.  
NOTES  
1
2
Press the POWER button to turn off the power.  
The front panel may become hot (especially the  
connector terminals), this is not malfunction.  
To protect the front panel, place it in the supplied  
carrying case.  
Press the  
(Release) button to remove the  
front panel.  
3
Using a ballpoint pen or other pointed object,  
press the RESET switch mounted behind this  
hole to complete the initialization procedure.  
Attaching the Front Panel  
1
First, insert the right side of the front panel into  
the main unit. Align the groove on the front panel  
with the projection on the main unit.  
RESET Switch  
4
Reattached the front panel again.  
2
Push the left side of the front panel until it locks  
firmly into the main unit.  
NOTES  
The front panel may become hot (especially the  
connector terminals), this is not malfunction.  
Before attaching the front panel, make sure that there  
is no dirt or dust on the connector terminals and no  
foreign object between the front panel and the main  
unit.  
2
1
NOTE  
Before attaching the front panel, make sure that there is  
no dirt or dust on the connector terminals and no foreign  
object between the front panel and the main unit.  
4-EN  
 
Turning Power On and Off  
Adjusting Volume/Bass/Treble/  
Balance (Between Left and Right  
Channels)/Fader (Between Front  
and Rear Speakers)  
1
Press the POWER button to turn on the unit.  
NOTE  
The unit can be turned on by pressing any other button  
except the eject c button.  
1
Press the MODE button repeatedly to choose  
the desired mode.  
Each press changes the modes as follows:  
The volume level gradually increases to the  
previous level you were listening to before the  
unit was turned off.  
Press the POWER button again to turn off the  
unit.  
VOL  
BASS  
FAD ←  
TREB  
BAL ←  
NOTE  
NOTE  
If the 6 or 5 button is not pressed in 5 seconds after  
selecting the BASS, TREBLE, BALANCE and FADER  
modes, the unit automatically sets in the VOLUME mode.  
When the power is turned on for the very first time after  
the unit is connected to the vehicle's battery, the unit  
produces sound with the volume level 12, loudness on in  
the tuner mode.  
2
Press the 6 and 5 buttons until the desired  
sound is obtained in each mode.  
Non Fading Pre-out (N.F.P.) On and  
Off (TDM-7586RB/TDM-7584R only)  
NOTE  
The settings of the Bass and Treble will be individually  
memorized for each source (FM, MW, LW, Tape and CD  
Changer) until the setting is changed.  
Depending on the connected devices, some functions and  
display indications do not work.  
1
Press and hold the Eject (c) button for at least 3  
seconds.  
With each press, N.F.P. is toggled On or Off.  
N.F.P. ON:  
In this position, the Pre-Output on the TDM-  
7586RB/TDM-7584R will not be affected by the  
fader. This is ideal for driving a subwoofer  
amplifier.  
N.F.P. OFF:  
Returns to normal fader mode.  
Turning Loudness On/Off  
1
Press and hold the LOUD button for at least  
2 seconds to activate or deactivate the loudness  
mode. The display shows "LD" when the  
loudness mode is activated.  
NOTES  
Initial mode is N.F.P. OFF.  
Set the N.F.P. to OFF unless the subwoofer is used.  
Adjusting Source Signal Levels  
If the difference in volume level between the tape  
player and FM radio is too great, adjust the FM  
signal level as follows.  
1
2
Press and hold the SETUP button for at least 3  
seconds.  
Press the Preset 1 button to select the FM signal  
level HI (High) or LO (Low) to make the signal  
levels between the FM band and tape player  
closer.  
Each press toggles between FM-LV HI and FM-  
LV LO.  
3
Press the SETUP button to cancel the adjusting  
mode.  
5-EN  
 
Radio Operation  
BAND  
SOURCE  
DN g  
f UP  
TUNE / A.ME  
Preset buttons (1 through 6)  
3
4
Press the TUNE button to illuminate the "DX"  
and "SEEK" indicators in the display.  
With the DX mode activated, both strong and  
weak stations will be tuned in the Auto-Seek  
operation.  
Press again to return to the local mode. The "DX"  
indicator will turn off and the "SEEK" indicator  
will remain illuminated. Now, only strong stations  
will be tuned.  
Manual Tuning  
1
Press the SOURCE button until radio frequency  
appears in the display.  
2
Press the BAND button repeatedly until the  
desired radio band is displayed.  
Each press changes the radio bands as follows:  
F1 F2 MW LW  
Press the DN g or f UP button to  
automatically seek a station downward or  
upward respectively.  
When the unit finds a station, the unit stops at  
that station.  
3
4
Press the TUNE button repeatedly until "DX  
SEEK" and "SEEK" disappears from the display.  
NOTE  
The initial mode is DX-SEEK.  
Press the same button again to seek the next  
station.  
Press the DN g or f UP button to move  
downward or upward one step respectively until  
the desired station frequency is displayed.  
Manual Storing of Station Presets  
NOTE  
1
Select the radio band and tune in a desired radio  
station you wish to store in the preset memory.  
The ST indicator appears on the display when a Stereo  
FM station is tuned in. If the stereo FM signal becomes  
weak, the ST indicator disappears from the display and  
the unit automatically switches the mode from stereo to  
monaural to reduce the noise. When the signal becomes  
strong enough, the unit automatically switches back to  
the stereo mode.  
2
Make sure that the function indicator at the top  
side of the "F" button illuminates, then press and  
hold the preset buttons (1 through 6) that you  
want to store the station on for at least 2  
seconds. The selected station is stored.  
The display shows the band, preset No. with a  
triangle (9) and station frequency memorized.  
Automatic Seek Tuning  
1
Press the SOURCE button until radio frequency  
appears in the display.  
2
Press the BAND button repeatedly until the  
desired radio band is displayed.  
Each press changes the radio bands as follows:  
F1 F2 MW LW  
6-EN  
 
3
Repeat the procedure to store up to 5 other  
stations onto the same band.  
Tuning to Preset Stations  
To use this procedure for other bands, simply  
select the band desired and repeat the  
procedure.  
1
Press the SOURCE button until the frequency  
appears in the display.  
2
Press the BAND button repeatedly until the  
desired band is displayed.  
Each press changes the radio bands as follows:  
A total of 24 stations can be stored in the preset  
memory (6 stations for each band; FM1, FM2,  
MW and LW).  
F1 F2 MW LW  
NOTE  
If a preset memory has already been set in the same  
preset location, it will be cleared and the new station will  
be memorized.  
3
Make sure that the function indicator at the top  
side of the "F" button illuminates, then press the  
station preset button that has your desired radio  
station in memory.  
The display shows the band, preset number with  
a triangle and frequency of the station selected.  
Automatic Memory of Station  
Presets  
1
Press the SOURCE button until the frequency  
appears in the display.  
2
Press the BAND button until the desired radio  
band appears in the display.  
Each press changes the radio bands as follows:  
F1 F2 MW LW  
3
Press and hold the A. ME. button for at least 2  
seconds.  
The frequency on the display continues to  
change while the automatic memory is in  
process.  
The tuner will automatically seek and store 6  
strong stations in the selected band in order of  
signal strength.  
When the automatic memory has been  
completed, the tuner goes to the station stored in  
the preset location No. 1.  
NOTE  
If no stations are stored, the tuner will return to the  
original station you were listening to before the auto  
memory procedure began.  
7-EN  
 
RDS Operation  
AF  
T.INFO  
F
3
POWER/SETUP  
Preset buttons  
(1 through 6)  
DN g  
f UP  
PTY  
Setting RDS Reception Mode and  
Receiving RDS Stations  
Recalling Preset RDS Stations  
1
Press the AF button to activate the RDS mode.  
The display shows "AF" when the RDS mode is  
activated.  
The RDS (Radio Data System) is a radio  
information system using the 57 kHz subcarrier of  
regular FM broadcast.The RDS allows you to  
receive a variety of information such as traffic  
information, station names, and to automatically  
re-tune to a stronger transmitter that is  
2
Make sure that the function indicator at the top  
side of the "F" button illuminates, then press the  
preset button in which your desired RDS station  
is preset.  
If the preset station's signal is weak, the unit  
automatically searches and tunes to a stronger  
station in the AF (Alternative Frequencies) list.  
broadcasting the same programme.  
1
2
Press the AF button to activate the RDS mode.  
The display shows "AF" when the RDS mode is  
activated.  
3
If the preset station and the stations in the AF list  
cannot be received:  
Press the same preset button again within 5  
seconds to have the unit search for a station in  
the PI (Programme Identification) list.  
If there are still no stations receivable in the  
area, the unit displays the frequency of the  
preset station and the preset indicator  
disappears.  
If the signal level of the Regional (Local) station  
being tuned becomes too weak to receive, press  
the same preset button to tune in a Regional  
station in other district.  
Press the DN g or f UP button to tune in  
the desired RDS station.  
NOTE  
When the BAND button is pressed and held for more than  
2 seconds while a station name is displayed, the display  
shows the station frequency for 5 seconds.  
When the RDS station signal received has  
become weak:  
AF seek mode, press and hold the AF button for  
at least 2 seconds to have the unit  
automatically seek for a stronger station in the  
AF list.  
NOTE  
For presetting the RDS stations, refer to the Radio  
Operations section. The RDS stations can be preset in  
the F1 and F2 bands only.  
If there is no AF station, the display shows  
"SEEK END."  
3
Press the AF button to deactivate the RDS  
mode.  
Tips  
The RDS digital data includes the followings:  
PI  
PS  
AF  
TP  
Programme Identification  
Programme Service Name  
List of Alternative Frequecncies  
Traffic Programme  
TA  
PTY  
EON  
Traffic Announcement  
Programme Type  
Enhanced Other Networks  
8-EN  
 
NOTE  
Turning Emergency Alarm On or Off  
If no button is pressed within 5 seconds after pressing the  
PTY button, the PTY mode will be automatically cancelled.  
1
2
Press and hold the SETUP button for at least 3  
seconds.  
3
4
Press the DN g and f UP buttons within 5  
seconds after activating the PTY mode to  
choose the desired programme type while the  
PTY (programme type) is being displayed. Each  
press scrolls the programme type by one.  
Press the Preset 3 button repeatedly to select  
the PTY31 ON or PTY31 OFF mode.  
In the PTY31 ON mode, the unit will make an  
emergency announcement when the unit  
receives the PTY31 (Emergency Broadcast)  
signal.  
LIGHT M CLASSICS OTHER M ←  
3
Press the SETUP button to activate the selected  
mode.  
Press the PTY button within 5 seconds after  
selecting the programme type to start searching  
for a station in the selected programme type.  
The chosen programme type indicator blinks during  
searching and lights when a station is found.  
Receiving Traffic Information  
1
Press the T.INFO button to activate the Traffic  
Information mode.  
The display shows "T.INFO." when the Traffic  
If no station is found, "NO PTY" will be displayed  
for 5 seconds.  
Information mode is activated.  
5
Press the "F" button to activate the normal  
mode. The function indicator at the top side of  
the "F" button will illuminate.  
2
Press the DN g or f UP button to select  
your desired traffic information station. When a  
traffic information station is tuned in, the TP  
indicator lights up.  
Receiving Traffic Information While  
Playing Tape or Radio  
Traffic information is heard only when it is being  
broadcast. If traffic information is not being  
broadcast, the unit is set in the standby mode.  
When a traffic information broadcast begins, the  
unit automatically receives it and the display  
shows "TRF-INFO" for 5 seconds and returns to  
the PS display.  
1
2
Press the T.INFO button repeatedly until the  
T.INFO indicator appears in the display.  
Press the DN g and f UP buttons to  
select a traffic information station if necessary.  
When a traffic information broadcast starts, the  
unit automatically mutes the tape player or the  
regular FM broadcast.  
When traffic information broadcast is over, the  
unit will automatically set in the standby mode.  
When the traffic information broadcast finishes,  
the unit automatically returns to the original  
source play before the traffic information  
broadcast began.  
NOTES  
If the traffic information broadcast signal falls below a  
certain level, the unit remains in the receiving mode for  
1 minute. If the signal remains below a certain level for  
over 1 minute, the unit produces an alarming sound.  
If you do not want to listen to the traffic information  
being received, lightly press the T. INFO button to skip  
that traffic information message. The T. INFO mode  
will remain in the ON position to receive the next  
traffic information message.  
When traffic information stations cannot be  
received:  
In the tuner mode:  
When the TP signal can no longer be received,  
an alarm will be sounded after 1 minute.  
In the Tape mode:  
When the TP signal can no longer be received,  
the traffic information station of another  
frequency will be selected automatically.  
If the volume level is changed while receiving traffic  
information, the changed volume level will be  
memorized. When traffic information is received next  
time, the volume level will be automatically adjusted  
to the level memorized.  
PTY (Programme Type) Tuning  
NOTE  
The receiver is equipped with the EON (Enhanced Other  
Networks) function in order to keep track of additional  
alternative frequencies to the AF list. The EON indicator  
appears while an RDS EON station is being received. If  
the station being received does not broadcast the traffic  
information, the receiver automatically tunes in the  
related station that broadcasts the traffic information  
when it occurs.  
1
Press the "F" button.  
The function indicator at the top side of the "F"  
button will turn off.  
2
Press the PTY button to activate the PTY mode.  
The Programme Type of the station being  
currently received will be displayed for 5 seconds.  
If there is no receivable PTY broadcast, "NO  
PTY" will be displayed for 5 seconds.  
If no RDS station can be received, the display  
shows "NO RDS."  
3
Press the "T.INFO" button to deactivate the  
Traffic Information mode.  
The "T.INFO" indicator disappears.  
9-EN  
 
RDS Operation  
F
SETUP  
2
NEWS  
Priority News  
Receiving RDS Regional (Local)  
Stations  
This function allows you to preset to give priority  
to the News programme.You will never miss the  
News programme as the unit automatically gives  
priority to the News programme whenever it  
begins broadcasting, and interrupts the  
programme you are currently listening. This  
feature is functional when your unit is set to a  
mode other than the LW and MW modes.  
1
Press and hold the SETUP button for at least 3  
seconds to activate the setting mode.  
2
Press the preset 2 button to turn on or off the  
REG (Regional) mode.  
In the REG OFF mode, the unit automatically  
keeps receiving the related local RDS station.  
3
Press the SETUP button to deactivate the setting  
mode.  
1
2
Press the "F" button.  
The function indicator at the top side of the "F"  
button will turn off.  
Press the NEWS button to activate the  
PRIORITY NEWS mode.  
"NEWS" lights up in the display.  
To disable the PRIORITY NEWS function,  
press the NEWS button.  
NOTE  
In the PRIORITY NEWS function, unlike in the T.INFO  
function, the volume does not increase automatically.  
3
Press the "F" button to activate the normal  
mode.  
The function indicator at the top side of the "F"  
button will illuminate.  
10-EN  
 
Cassette Player Operation  
c
B NR  
REPEAT  
-/J  
B.SKIP  
Inserting/Ejecting Cassette  
2
Press the :/J button to pause the tape playback.  
The display shows "PAUSE."  
Press again to resume the tape playback.  
1
Insert a cassette tape into the slot with the open  
side facing right.  
3
Press the Eject (c) button to stop the tape play  
and eject the cassette.  
The tape-direction indicator disappears.  
Dolby B NR (Noise Reduction)  
(TDM-7586RB/TDM-7584R only)  
When the cassette is loaded, the player  
automatically starts tape playback and indicates  
"TAPE" in the display.  
1
After inserting a Dolby B NR encoded tape,  
press the B NR button.  
2
Press the Eject (c) button when you want to  
eject the cassette tape.  
The display shows the "B NR" The tape noise is  
reduced in the Dolby NR mode when a Dolby B  
NR encoded tape is played.  
Press the B NR button to cancel the Dolby NR  
mode.  
NOTES  
Repeat Play  
When power is turned off or the front panel is removed,  
the full-logic mechanism will automatically switch to  
the PAUSE mode. This protects the tape from being  
deformed by the pinch-rollers if left for long periods.  
Auto Metal  
1
Press the REPEAT button to play back  
repeatedly the current programme being played.  
The "RPT" indicator appears and the programme  
will be played repeatedly.  
When a metal cassette tape is inserted, the player  
automatically adjusts to the equalization for metal or  
any other high bias tape for optimum sound.  
Press the REPEAT button to stop the repeat  
play. The "RPT" indicator disappears.  
Normal Play and Pause  
Blank Skip (B.SKIP)  
1
Insert a cassette (or press the source button to  
switch from the tuner or CD Changer mode if a  
cassette is already inside the tape player).  
The player begins playback. The display shows  
1
Press the B.SKIP button during tape play to skip  
over blank portions of the tape lasting 15  
seconds or longer, "B.S." appears on the display.  
Press the B.SKIP button to cancel the blank skip  
mode. "B.S." disappears from the display.  
"TAPE" and "  
or  
" during tape playback to  
show the tape side being played. When the end  
of the tape is reached, the unit automatically  
stops and reverses the tape to play the other  
side of the tape.  
11-EN  
 
Cassette Player Operation  
P.S.UP  
P.S.DN  
PROG  
SCAN  
f UP  
DN g  
Programme Sensor (P.S.)  
Fast Forward and Rewind  
1
Press the P.S. DN button once during tape play  
to return to the beginning of the current selection  
being played.  
1
Press the DN g or f UP button during  
tape play to fast rewind or forward the tape  
respectively.  
If you wish to return to a selection further back,  
press repeatedly until the number of selections  
you would like to skip is shown in the display.  
The display will show PS-1 with the first press  
and will increase by one with each successive  
press up to PS-9. The tape indicator will blink  
showing the direction of your search.  
The tape side indicator ( or ) blinks and >>  
or << moves indicating the direction of the tape.  
When the end of the tape is reached in the  
rewind mode, the player stops automatically and  
begins playing from the beginning of the same  
side. When the end of the tape is reached in the  
fast forward mode, the player stops automatically  
and begins playing from the beginning of the  
opposite side.  
Press the P.S. UP button once during tape play  
to advance to the beginning of the next selection.  
If you wish to advance to a selection further  
ahead, press repeatedly until the number of  
selections you would like to skip is shown in the  
display.  
The display will show PS+1 with the first press  
and will increase with each successive press up  
to PS+9. The tape indicator will blink showing the  
direction of your search during searching  
operation.  
2
Press the f UP button during forwarding to  
stop fast forwarding and resume tape play.  
Press the DN g button during rewinding to  
stop rewinding and resume tape play.  
The tape side indicator stops blinking.  
Scanning Programmes  
1
Press the SCAN button to play the first 10  
seconds of each programme on the tape.  
"SCAN" appears on the display.  
NOTES  
The programme sensor feature is functional in the tape  
play mode only.  
You can advance to the 9th (max.) programme or  
return to the 8th (max.) programme.  
Press the SCAN button to cancel the scanning  
when the desired programme is found.  
NOTE  
The SCAN operation cannot detect blank sections of less  
than 4 seconds.  
Manual Reverse  
1
Press the PROG button during tape play to  
change the tape direction to play the other side  
of the tape.  
The tape side indicators ( and  
) change to  
show which side of the cassette is being played.  
12-EN  
 
CD Changer Operation  
SOURCE  
DN g  
f UP  
-/J  
Preset buttons  
Controlling CD Changer (Optional)  
Music Sensor (M.S.) Skip  
1
Press the DN g button once to return to the  
beginning of the current track.  
If you wish to return to the beginning of a track  
further back, repeatedly press until you reach the  
desired track.  
If an optional Alpine 6-disc CD Changer (M-Bus)  
is connected to the 8-pin DIN connector of the  
TDM-7586RB/TDM-7584R/TDM-7582R you can  
control the CD Changer using the TDM-7586RB/  
TDM-7584R/TDM-7582R.  
Press the f UP button once to advance to the  
beginning of the next track.  
If you wish to advance to a track further ahead,  
press repeatedly until the desired track is  
reached.  
NOTE  
The CD controls on the TDM-7586RB/TDM-7584R/TDM-  
7582R for the CD operation are functional only when the  
CD Changer is interconnected with the TDM-7586RB/  
TDM-7584R/TDM-7582R.  
NOTE  
1
Press the SOURCE button to activate the CD  
Changer.  
The music sensor feature is functional in the play or  
pause mode.  
The display shows the disc number and track  
number.  
Fast Forward and Backward  
2
3
Make sure that the Function indicator illuminates,  
then press the Preset buttons to select the  
desired disc loaded in the CD Changer.  
1
Press and hold the DN g or f UP button to  
quickly move backward or forward respectively  
until you reach the desired portion.  
NOTE  
This feature works only in the CD playback mode.  
To pause playback, press the -/J button.  
Pressing the -/J button again will resume  
playback.  
NOTES  
If the "F" indicator is illuminated the Disc Select  
buttons become nonfunctional.  
Press the SOURCE button to activate the CHANGER  
mode.  
13-EN  
 
CD Changer Operation  
SOURCE  
TITLE  
F
Preset buttons  
M.I.X.  
REPEAT  
SCAN  
DN g  
f UP  
Repeat Play on Single Track or  
Entire Disc  
M.I.X. (Random) Play  
1
Press "F" button.  
The function indicator at the top side of the "F"  
button will turn off.  
1
Press the "F" (Function) button.  
The function indicator at the top side of the "F"  
button will turn off.  
2
Press the M.I.X. button while the CD is playing or  
in the Pause mode.  
The M.I.X. indicator will appear in the display.  
The tracks on the disc will be played back in a  
random sequence.  
After all the tracks on the disc have been played  
back, the player loads the next disc and begins a  
new random sequence.  
2
Press the REPEAT button to display "RPT" or  
"RPT ALL" to play back repeatedly the track  
being currently played or the entire disc selected.  
NOTE  
Single track cannot be repeated during M.I.X. play.  
Random play continues until the M.I.X. mode is  
cancelled.  
3
Press the "F" button to activate the normal  
mode.  
The function indicator at the top side of the "F"  
Press the M.I.X. button again to cancel the M.I.X.  
mode.  
The M.I.X. indicator will disappear from the  
display.  
button will illuminate.  
3
Press the "F" button to activate the normal  
mode.  
The function indicator at the top side of the "F"  
button will illuminate.  
NOTE  
Single track cannot be repeated during M.I.X. play.  
Scanning Programmes  
1
Press the "F" button.  
The function indicator at the top side of the "F"  
button will turn off.  
2
Press the SCAN button to play the first 10  
seconds of each track on the disc.  
The display shows the disc number, "SCAN",  
and track number being played during scan play.  
Press to the SCAN button to cancel scan play  
and resume normal play.  
3
Press the "F" button to activate the normal  
mode.  
The function indicator at the top side of the "F"  
button will illuminate.  
14-EN  
 
6
7
Repeat the steps 4 and 5 above to complete the  
titling. Entering the eighth character,  
automatically stores the title into memory.  
To Display CD Titles  
(TDM-7586RB/TDM-7584R only)  
When entering a title of less than 8 characters  
(for example, 3 character title):  
After entering 3 characters to complete your title,  
the 4th character space will be blinking. Go to  
step 7 to complete the title.  
Titles can be displayed for the CDs with titles  
entered.  
(Refer to page 15 to title discs.)  
1
Press the TITLE button in the CD mode.  
The display will be switched each time the switch  
is pressed.  
Press and hold the TITLE button for at least 3  
seconds to record the title.  
NOTES  
When the memory capacity for the disc titles is used  
up, the display shows "FULL DATA" to indicate that  
no more title can be memorized.  
When you want to erase a title, enter the " " symbol  
into all spaces.  
Titling Discs (TDM-7586RB/  
TDM-7584R only)  
1
Press the TITLE button to select the disc title  
display mode. (Refer to page 15.)  
Erasing Disc Title (TDM-7586RB/  
TDM-7584R only)  
2
Make sure that the function indicator at the top  
side of the "F" button illuminates, then press the  
Preset buttons to select the desired disc to be  
titled.  
1
Press the TITLE button to select the disc titling  
mode. Then press and hold it for at least 3  
seconds.  
3
4
5
Press and hold the TITLE button for at least 3  
seconds.  
The first digit blinks.  
2
Press and hold the SOURCE button for at least  
3 seconds to activate the title erasing mode.  
The disc title in the display will blink.  
Press the DN g or f UP button repeatedly  
to select the desired letter/numeral/symbol  
available for naming.  
3
4
5
Press the DN g or f UP button repeatedly  
until the disc title you want to erase is displayed.  
Press the TITLE button to store the first  
character.  
The first character will stop blinking and the  
display will automatically advance to the next  
digit. When that digit begins to blink, you may  
choose the next letter or symbol of your title.  
Press and hold the SOURCE button for at least  
3 seconds to erase the disc title displayed.  
Press and hold the TITLE button for at least 3  
seconds to cancel the disc title erasing mode.  
15-EN  
 
Remote Control Operation  
1
2
5
Remote control sensor  
6
7
8
9
!
3
4
"
#
8 g DN Button  
Controls on Remote Control  
(TDM-7586RB/TDM-7584R only)  
Radio mode: SEEK (DN) Button  
CD changer mode: Press the button to go back  
to the beginning of the current track.  
Tape mode: Press the button during tape play to  
fast rewind the tape respectively.  
1 Power Button  
Press the button to turn the power on/off.  
2 Source Button  
9 f UP Button  
Press to select the audio source.  
Radio mode: SEEK (UP) Button  
CD changer mode: Press the button to advance  
to the beginning of the next track.  
Tape mode: Press the button during tape play to  
fast forward the tape respectively.  
3 -/J Button  
Press the button to switch between the Play and  
Pause modes for Tape or CD.  
4 ANGLE 89 Buttons  
! 9 Button  
This button is not used.  
Radio mode: Pressing the button will select, in  
descending order, stations programmed into the  
radio's presets as shown below.  
5 Band/Program Button  
Radio mode: BAND Button  
Press the button and the band will change as  
shown below.  
6 5 ... 1  
FM1 FM2 MW LW  
CD Changer mode: DISC Select (DN) Button  
Press the button to select a disc in descending  
order.  
Tape mode: Press the button once during tape  
play to return to the beginning of the current  
selection being played.  
Tape mode: PROG button  
Press the button during tape play to change the  
tape direction to play the other side of the tape.  
6 Volume Adjustment Buttons  
To increase the volume level:  
Press the Lbutton  
" Mute Button  
Press the button to lower the volume by 20 dB  
instantly. Press the button again to cancel.  
To decrease the volume level:  
Press the Kbutton  
# Audio Processor Button  
7 8 Button  
This button is not used.  
Radio mode: Pressing the button will select, in  
ascending order, stations programmed into the  
radio's presets as shown below.  
1 2 ... 6  
CD Changer mode: DISC Select (UP) Button  
Press the button to select a disc in ascending order.  
Tape mode: Press the button once during tape  
play to advance to the beginning of the next  
selection.  
16-EN  
 
Battery Replacement  
Applicable battery: Use two “AAA” sized dry  
batteries or equivalent.  
1
Opening the battery cover  
Slide out the battery cover while firmly pressing  
the direction of arrow.  
2
Replacing the battery  
Put the batteries in the case observing the  
polarities as illustrated.  
3
Closing the cover  
Push the cover as illustrated until a click is  
heard.  
17-EN  
 
Information  
Cassette  
In Case of Difficulty  
Tape playback sounds dull.  
• The tape head needs cleaning.  
- Clean the tape head.  
• Incorrect Dolby NR in use (TDM-7586RB/TDM-  
7584R only).  
If you encounter a problem, please turn the power  
off, then on again. If the unit is still not functioning  
normally, please review the items in the following  
checklist. This guide will help you isolate the  
problem if the unit is at fault. Otherwise, make  
sure the rest of your system is properly connected  
or consult your authorized Alpine dealer.  
- Check Dolby NR switch setting.  
CD  
CD Changer not functioning.  
• Out of operating temperature range +50˚C (+120˚F)  
for CD.  
- Allow the vehicle's interior (or trunk) temperature to  
cool.  
CD playback sound is wavering.  
• Moisture condensation in the CD Module.  
- Allow enough time for the condensation to evaporate  
(about 1 hour).  
Basic  
No function or display.  
Vehicle's ignition is off.  
- If connected following instructions, the unit will not  
operate with the vehicle's ignition off.  
• Improper power lead connections.  
- Check power lead connections.  
• Blown fuse.  
Unable to fast forward or backward the CD.  
• The CD has been damaged.  
- Check the fuse on the battery lead of the unit; replace  
with the proper value if necessary.  
• Internal micro-computer malfunctioned due to  
interference noise etc.  
- Press the Reset switch with a ballpoint pen or other  
pointed article.  
- Eject the CD and discard it; using a damaged CD in  
your unit can cause damage to the mechanism.  
CD playback sound skips due to vibration.  
• Improper mounting of the CD Changer.  
- Securely re-mount the CD Changer.  
• Disc is very dirty.  
Radio  
- Clean the disc.  
• Disc has scratches.  
- Change the disc.  
Unable to receive stations.  
• No antenna or open connection in cable.  
- Make sure the antenna is properly connected;  
replace the antenna or cable if necessary.  
Unable to tune stations in the seek mode.  
You are in a weak signal area.  
- Make sure the tuner is in the DX mode.  
• If the area you are in is a primary signal area, the  
antenna may not be grounded and connected properly.  
- Check your antenna connections; make sure the  
antenna is properly grounded at its mounting  
location.  
CD playback sound skips without vibration.  
• Dirty or scratched disc.  
- Clean the disc; damaged discs should be replaced.  
Single (8 cm) disc does not play.  
• Single CD adaptor is not used.  
- Attach a single CD adaptor (recommended by Alpine)  
to the single disc and insert into the CD magazine.  
• The antenna may not be the proper length.  
- Make sure the antenna is fully extended; if  
broken, replace the antenna with a new one.  
Broadcast is noisy.  
• The antenna is not the proper length.  
- Extend the antenna fully; replace it if it is broken.  
• The antenna is poorly grounded.  
- Make sure the antenna is grounded properly at its  
mounting location.  
18-EN  
 
Indication for CD Changer  
HI TEMP  
Specifications  
FM TUNER SECTION  
Tuning Range  
Mono Usable Sensitivity  
50 dB Quieting Sensitivity  
Alternate Channel Selectivity 80 dB  
Signal-to-Noise Ratio  
87.5 108.0 MHz  
0.7 µV  
1.1 µV  
Protective circuit is activated due to high temperature.  
- The indicator will disappear when the temperature  
returns to within operation range.  
65 dB  
Stereo Separation  
35 dB  
ERROR - 01  
MW TUNER SECTION  
Tuning Range  
Sensitivity (IEC Standard)  
531 1,602 kHz  
25.1 µV/28 dB  
Malfunction in the CD Changer.  
- Consult your Alpine dealer. Press the magazine eject  
button and pull out the magazine.  
LW TUNER SECTION  
Tuning Range  
Sensitivity (IEC Standard)  
Check the indication. Insert the magazine again.  
If the magazine cannot be pulled out, consult your  
Alpine dealer.  
153 281 kHz  
31.6 µV/30 dB  
TAPE PLAYER SECTION  
Tape Speed  
Wow & Flutter  
Signal-to-Noise Ratio  
With Dolby B-TYPE NR  
Magazine ejection not possible.  
- Press the magazine eject button. If the magazine does  
not eject, consult your Alpine dealer.  
1-7/8 ips (4.8 cm/sec) 0.7%  
0.06% WRMS  
(TDM-7586RB/TDM-7584R only) 68 dB  
ERROR - 02  
Without Dolby NR  
Frequency Response  
With Alpine Test Tape  
60 dB  
A disc is left inside the CD Changer.  
3020,000 Hz  
- Press the Eject button to activate the eject function.  
When the CD Changer finishes the eject function,  
insert an empty CD magazine into the CD Changer to  
receive the disc left inside the CD Changer.  
REMOTE CONTROL  
(TDM-7586RB/TDM-7584R only)  
Battery Type  
"AAA" size dry battery  
Battery Quantity  
Dimensions (W × H × D)  
2
42 mm (1-21/32")  
× 121 mm (4-3/4")  
× 23 mm (15/16")  
50 g (1.8 oz)  
NO MAGZN  
No magazine is loaded into the CD Changer.  
- Insert a magazine.  
Weight (without battery)  
GENERAL  
Power Requirement  
14.4 V DC  
(1116 V allowable)  
45 W × 4  
NO DISC  
Maximum Power Output*  
Maximum Pre-Output Voltage 2 V/10k ohms  
Bass  
Treble  
No indicated disc.  
- Choose another disc.  
15 dB at 30 Hz  
10 dB at 10 kHz  
1.4 kg (3 lbs. 1 oz)  
Weight  
CHASSIS SIZE  
Width  
Height  
178 mm (7")  
50 mm (2")  
Depth  
155 mm (61/8")  
NOSEPIECE SIZE  
Width  
Height  
Depth  
170 mm (63/4")  
46 mm (113/16")  
19 mm (3/4")  
* Under maximum operating voltage and input signal, into 4  
ohms.  
Due to continuous product improvement, specifications and  
design are subject to change without notice.  
19-EN  
 
Installation and Connections  
DO NOT INSTALL IN LOCATIONS WITH HIGH  
Before installing or connecting the unit,  
please read the following and pages 2 and 3 of  
this manual thoroughly for proper use.  
MOISTURE OR DUST.  
Avoid installing the unit in locations with high incidence  
of moisture or dust. Moisture or dust that penetrates into  
this unit may result in product failure.  
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR  
WARNING  
PINCHED BY A SHARP METAL EDGE.  
Route the cables and wiring away from moving parts (like  
the seat rails) or sharp or pointed edges. This will prevent  
crimping and damage to the wiring. If wiring passes  
through a hole in metal, use a rubber grommet to prevent  
the wire's insulation from being cut by the metal edge of  
the hole.  
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE  
GROUND.  
(Check with your dealer if you are not sure.) Failure to do  
so may result in fire, etc.  
BEFORE WIRING, DISCONNECT THE CABLE FROM  
THE NEGATIVE BATTERY TERMINAL  
Failure to do so may result in electric shock or injury due  
to electrical shorts.  
HAVE THE WIRING AND INSTALLATION DONE BY  
EXPERTS.  
The wiring and installation of this unit requires special  
technical skill and experience. To ensure safety, always  
contact the dealer where you purchased this product to  
have the work done.  
DO NOT SPLICE INTO ELECTRICAL CABLES.  
Never cut away cable insulation to supply power to other  
equipment. Doing so will exceed the current carrying  
capacity of the wire and result in fire or electric shock.  
Precautions  
DO NOT INSTALL IN LOCATIONS WHICH MIGHT  
HINDER VEHICLE OPERATION, SUCH AS THE  
• Be sure to disconnect the negative cable from the (–) pole  
of the battery before connecting your TDM-7586RB/  
TDM-7584R/TDM-7582R to avoid short circuits.  
• Use the correct ampere rating when replacing fuses.  
Failure to do so may result in fire or electric shock.  
• Be sure to connect the leads correctly according to the  
diagram. Otherwise malfunctioning of the unit and/or  
damage to the vehicle may occur.  
• Be sure to connect the speaker (–) leads to the speaker  
(–) terminal. Never connect left and right channel  
speaker cables to each other or to the vehicle body.  
• Use only vehicles with a 12 volt negative (–) ground.  
Check with your dealer if you are not sure. Failure to do  
so may result in fire or electric shock.  
You must be very careful when connecting wires to the  
vehicle's electrical system. Be sure you do not use leads  
of factory installed components (like an on-board  
computer). When connecting TDM-7586RB/TDM-  
7584R/TDM-7582R to the fuse box, make sure the fuse  
for the intended circuit of the TDM-7586RB/TDM-  
7584R/TDM-7582R has the appropriate amperage.  
Failure to do so may result in damage to the unit and/or  
the vehicle. When in doubt, consult your ALPINE dealer.  
• The TDM-7586RB/TDM-7584R/TDM-7582R uses  
female RCA-type jacks for connection to other units (e.g.  
amplifier) having RCA connections. You may need an  
adaptor to connect other units. If so, please contact your  
authorized ALPINE dealer for assistance.  
STEERING WHEEL OR SHIFT LEVER.  
Doing so may obstruct forward vision or hamper  
movement etc. and results in serious accident.  
DO NOT DAMAGE PIPE OR WIRING WHEN  
DRILLING HOLES.  
When drilling holes in the chassis for installation, take  
precautions so as not to contact, damage or obstruct pipes,  
fuel lines, tanks or electrical wiring. Failure to take such  
precautions may result in fire.  
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR  
STEERING SYSTEMS TO MAKE GROUND  
CONNECTIONS.  
Bolts or nuts used for the brake or steering systems (or  
any other safety-related system), or tanks should NEVER  
be used for installations or ground connections. Using  
such parts could disable control of the vehicle and cause  
fire etc.  
MAKE THE CORRECT CONNECTIONS.  
Failure to make the proper connections may result in fire  
or product damage.  
CAUTION  
USE SPECIFIED ACCESSORY PARTS AND INSTALL  
THEM SECURELY.  
Be sure to use only the specified accessory parts. Use of  
other than designated parts may damage this unit  
internally or may not securely install the unit in place.  
This may cause parts to become loose resulting in hazards  
or product failure.  
IMPORTANT  
Please record the serial number of your unit in the  
space provided below and keep it as a permanent  
record. The serial number plate is located on the  
bottom of the unit.  
SERIAL NUMBER:  
INSTALLATION DATE:  
INSTALLATION TECHNICIAN:  
PLACE OF PURCHASE:  
20-EN  
 
3
Slide the TDM-7586RB/TDM-7584R/TDM-7582R  
into the dashboard. When the unit is in place,  
make sure the locking pins are fully seated in the  
down position. This can be done by pressing  
firmly in on the unit while pushing the locking pin  
down with a small screwdriver. This ensures that  
the unit is properly locked and will not  
Installation  
1
Remove the Detachable Front Panel (refer to  
page 4). Slide mounting sleeve from main unit.  
(See Removal Procedure) Slide the mounting  
sleeve into the dashboard.  
Bracket  
accidentally come out from the dashboard. Install  
the Detachable Front Panel.  
Dashboard  
Rubber Cap  
(Included)  
Hex Bolt  
(Included)  
Mounting Sleeve  
(Included)  
TDM-7586RB/TDM-7584R/  
TDM-7582R  
Lock pin  
Removal  
2
When your vehicle has the Bracket, mount the  
long hex bolt onto the rear panel of the TDM-  
7586RB/TDM-7584R/TDM-7582R and put the  
Rubber Cap on the hex bolt. If your vehicle does  
not have the Mounting Support, reinforce the  
head unit with the metal mounting strap (not  
supplied). Connect all the leads of the TDM-  
7586RB/TDM-7584R/TDM-7582R according to  
details described in the CONNECTIONS section.  
1 Remove the detachable front panel.  
2 Use a small screwdriver (or similar tool) to push the  
locking pins to the "up" position (see above drawing).  
As each pin is unlocked, gently pull out on the unit to  
make sure it does not re-lock before unlocking the  
second pin.  
3 Pull the unit out, keeping it unlocked as you do so.  
<JAPANESE CAR>  
NOTE:  
For the screw *, provide a proper screw to the chassis  
installing location.  
Metal Mounting Strap  
Face Plate  
Screw  
Bolt Stud  
Hex Nut  
(M5)  
TDM-7586RB/TDM-7584R/  
TDM-7582R  
TDM-7586RB/TDM-7584R/  
TDM-7582R  
Screws (M5 × 8)  
(Included)  
Mounting Bracket  
21-EN  
 
Installation and Connections  
Connections  
Antenna  
ISO Antenna  
Converter Plug  
ISO Antenna  
Plug  
2
3
AUDIO INTERRUPT IN  
REMOTE TURN-ON  
(Pink/Black)  
(Blue/White)  
To vehicle phone  
To amplifier or equalizer  
To power antenna  
5
IGNITION  
(Red)  
Ignition Key  
GND  
(Black)  
9
POWER ANT  
(Blue)  
4
6
7
8
BATTERY  
(Yellow)  
Battery  
!
A
1
"
DIN Connector PIN Configuration  
#
Power Supply Ground  
lgnition  
Shield Ground  
A
$
Data Ground  
Lch  
SIG GND  
Battery  
Data Bus  
%
Rch  
Speakers  
(
Green  
Rear Left  
Green/Black  
)
~
White  
Front Left  
White/Black  
+
,
Gray/Black  
Gray  
Front Right  
-
.
&
Violet/Black  
Violet  
Rear Right  
/
Speakers  
CD Changer  
(Sold Separately)  
Rear Right  
Amplifier  
(Sold Separately)  
Rear Left  
:
22-EN  
 
1 Antenna Receptacle  
! Remote Control Interface Connector  
(TDM-7586RB/TDM-7584R only)  
To remote control interface box.  
" Rear Output RCA Connectors  
RED is right and WHITE is left.  
# DIN Connector  
Connect to the supplied ISO antenna convertor plug.  
2 Audio Interrupt In Lead (Pink/Black)  
Connect this lead to the Audio Interface output of a  
cellular phone which provides ground shorting when  
a call is received.  
3 Remote Turn-On Lead (Blue/White)  
Connect this lead to the remote turn-on lead of your  
amplifier or signal processor.  
Connect this to the DIN connector on the CD  
Changer.  
$ DIN Extension Cable  
4 Power Antenna Lead (Blue)  
NOTE  
Connect this lead to the +B terminal of your power  
antenna, if applicable.  
Older Alpine CD Changer came with standard, straight  
type DIN connectors. In installations where an L-type  
connector would simplify installation, the Alpine 491002  
Adaptor can be used (Sold Separately).  
NOTE  
This lead should be used only for controlling the  
vehicle's power antenna. Do not use this lead to turn on  
an amplifier or a signal processor, etc.  
% Power Supply Connector  
& ISO Connector (Speaker Output)  
( Left Rear (+) Speaker Output Lead (Green)  
) Left Rear (–) Speaker Output Lead (Green/  
Black)  
~ Left Front (+) Speaker Output Lead (White)  
+ Left Front (–) Speaker Output Lead (White/Black)  
, Right Front (–) Speaker Output Lead (Grey/  
Black)  
5 Switched Power Lead (Ignition) (Red)  
Connect this lead to an open terminal on the vehicle's  
fuse box or another unused power source which  
provides (+) 12V only when the ignition is turned on  
or in the accessory position.  
6 Fuse Holder (15A)  
7 Battery Lead (Yellow)  
- Right Front (+) Speaker Output Lead (Grey)  
. Right Rear (–) Speaker Output Lead (Violet/  
Black)  
/ Right Rear (+) Speaker Output Lead (Violet)  
: RCA Extension Cable (Sold Separately)  
Connect this lead to the positive (+) post of the  
vehicle's battery.  
8 ISO Power Supply Connector  
9 Ground Lead (Black)  
Connect this lead to a good chassis ground on the  
vehicle. Make sure the connection is made to bare  
metal and is securely fastened using the sheet metal  
screw provided.  
To prevent external noise from entering the audio system.  
Locate the unit and route the leads at least 10cm away from the car harness.  
Keep the battery power leads as far away from other leads as possible.  
Connect the ground lead securely to a bare metal spot (remove the coating if necessary) of the car chassis.  
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries  
various Alpine noise suppressors, contact them for further information.  
Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.  
23-EN  
 

3M Musical Instrument Amplifier KD45 User Manual
Access Handheld TV PTV 7000 User Manual
Acoustic Research Landscape Lighting AW851 User Manual
Addonics Technologies Network Card AD2SAHDCF User Manual
Adesso Mouse AKB 805MAC User Manual
Adesso Mouse WKB 3200UB User Manual
Alpine GPS Receiver PMD B200 User Manual
ATMT MP3 Player MP180 User Manual
Avital Remote Starter 4501 User Manual
Axis Communications Security Camera AVTPSC User Manual