LIFETIME™ 5' X 32" IA-LHO/RHO
WHIRLPOOLS BY AMERICAN STANDARD
HIGH GLOSS ACRYLIC
LIFETIME™ 5’ X 32”IA-LHO / RHO
Comfortable bathing design with form-fitted backrest
and molded-in armrests
❏ Model# 2425L-LHO Built-In Integral Apron
Left Hand Drain Outlet (specify color)
❏ Model# 2425L-RHO Built-In Integral Apron
Right Hand Drain Outlet (specify color)
• Acrylic with fiberglass reinforcement
• Lifetime Overflow Drain for maximum
water depth
• Integral apron with removable access panel
• Integral three-sided, tiling / water
retention flange
• 1.4 HP self-draining pump/motor with dry
run seal
• Eight flow adjustable jets including:
Two adjustable Ideal Flow Comfort Jets™
Six adjustable Comfort Jets™
• Two silent air volume controls
• Side-mounted On/Off control
• Designed with undermount installation option
• Complete factory installed and tested
whirlpool system
❏ Model# 2425LC-LHO Built-In Integral Apron
Left Hand Drain Outlet (specify color)
❏ Model# 2425LC-RHO Built-In Integral Apron
Right Hand Drain Outlet (specify color)
• Same as above with the EverClean™ whirlpool
system. The EverClean™ antimicrobial system
incorporates AlphaSan®, a patented
Components Required:
❏ Bath Filler*: (specify finish)
❏ Bath Drain: 1599.205.XXX (specify color)
OR 1599.500.020 (white only)
antimicrobial agent manufactured right into the
circulation system components, which
suppresses the growth of unsightly algae,
fungus, mold and mildew.
Custom Accessories Available:
❏ E-Z-Install™ Whirlpool Heater - EZHEAT-100
* See American Standard Faucet Selector
Nominal Dimensions:
60” x 32” x 21-1/2”
(1524 x 813 x 546mm)
For color/finish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
Compliance Certifications -
NOTE: E-Z-Install™ Whirlpool Heater is designed to
maintain water temperature during operation. It will not heat
cold water to desired bathing temperature.
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
SEE REVERSE FOR ROUGHING-IN DIMENSIONS
AND PRODUCT SPECIFICATIONS
AlphaSan® is a registered trademark of Milliken & Co.
© 2007 American Standard Inc.
HD-7
Revised 7/07
|