Asus Car Video System VN289QL User Manual

VN289QL Series  
LCD Monitor  
User Guide  
 
Notices  
Federal Communications Commission Statement  
This device complies with Part 15 of the FCC Rules. Operation is subject  
to the following two conditions:  
This device may not cause harmful interference, and  
This device must accept any interference received including  
interference that may cause undesired operation.  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance  
with manufacturer’s instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will  
not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment to an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
As an Energy Star® Partner, our company has determined  
that this product meets the Energy Star® guidelines for energy  
efficiency.  
Canadian Department of Communications Statement  
This digital apparatus does not exceed the Class B limits for radio  
noise emissions from digital apparatus set out in the Radio Interference  
Regulations of the Canadian Department of Communications.  
This class B digital apparatus complies with Canadian ICES-003.  
iii  
 
Safety information  
Before setting up the monitor, carefully read all the documentation that  
came with the package.  
To prevent fire or shock hazard, never expose the monitor to rain or  
moisture.  
Never try to open the monitor cabinet. The dangerous high voltages  
inside the monitor may result in serious physical injury.  
If the power supply is broken, do not try to fix it by yourself. Contact a  
qualified service technician or your retailer.  
Before using the product, make sure all cables are correctly connected  
and the power cables are not damaged. If you detect any damage,  
contact your dealer immediately.  
Slots and openings on the back or top of the cabinet are provided for  
ventilation. Do not block these slots. Never place this product near or  
over a radiator or heat source unless proper ventilation is provided.  
The monitor should be operated only from the type of power source  
indicated on the label. If you are not sure of the type of power supply to  
your home, consult your dealer or local power company.  
Use the appropriate power plug which complies with your local power  
standard.  
Do not overload power strips and extension cords. Overloading can  
result in fire or electric shock.  
Avoid dust, humidity, and temperature extremes. Do not place the  
monitor in any area where it may become wet. Place the monitor on a  
stable surface.  
Unplug the unit during a lightning storm or if it will not be used for a  
long period of time. This will protect the monitor from damage due to  
power surges.  
Never push objects or spill liquid of any kind into the slots on the  
monitor cabinet.  
To ensure satisfactory operation, use the monitor only with UL listed  
computers which have appropriate configured receptacles marked  
between 100 ~ 240V AC.  
The socket-outlet shall be installed near the equipment and shall be  
easily accessible  
If you encounter technical problems with the monitor, contact a  
qualified service technician or your retailer.  
iv  
 
Care & Cleaning  
Before you lift or reposition your monitor, it is better to disconnect the  
cables and power cord. Follow the correct lifting techniques when  
positioning the monitor. When lifting or carrying the monitor, grasp the  
edges of the monitor. Do not lift the display by the stand or the cord.  
Cleaning. Turn your monitor off and unplug the power cord. Clean the  
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains  
may be removed with a cloth dampened with mild cleaner.  
Avoid using a cleaner containing alcohol or acetone. Use a cleaner  
intended for use with the LCD. Never spray cleaner directly on the  
screen, as it may drip inside the monitor and cause an electric shock.  
The following symptoms are normal with the monitor:  
The screen may flicker during the initial use due to the nature of the  
fluorescent light. Turn off the Power Switch and turn it on again to  
make sure that the flicker disappears.  
You may find slightly uneven brightness on the screen depending on  
the desktop pattern you use.  
When the same image is displayed for hours, an afterimage of the  
previous screen may remain after switching the image. The screen will  
recover slowly or you can turn off the Power Switch for hours.  
When the screen becomes black or flashes, or cannot work anymore,  
contact your dealer or service center to fix it. Do not repair the screen  
by yourself!  
Conventions used in this guide  
WARNING: Information to prevent injury to yourself when trying to  
complete a task.  
CAUTION: Information to prevent damage to the components  
when trying to complete a task.  
IMPORTANT: Information that you MUST follow to complete a  
task.  
NOTE: Tips and additional information to aid in completing a task.  
v
 
Where to find more information  
Refer to the following sources for additional information and for product  
and software updates.  
1. ASUS websites  
The ASUS websites worldwide provide updated information on ASUS  
hardware and software products. Refer to http://www.asus.com  
2. Optional documentation  
Your product package may include optional documentation that may  
have been added by your dealer. These documents are not part of  
the standard package.  
vi  
 
1.1  
Welcome!  
Thank you for purchasing the ASUS® LCD monitor!  
The latest widescreen LCD monitor from ASUS provides a crisper,  
broader, and brighter display, plus a host of features that enhance your  
viewing experience.  
With these features, you can enjoy the convenience and delightful visual  
experience that the monitor brings you!  
1.2  
Package contents  
Check your package for the following items:  
LCD Monitor  
Monitor Base  
Quick Start Guide  
Warranty Card  
1x Power Cord  
1x VGA Cable  
1x Audio Cable  
1x DVI Cable (option)  
1x DisplayPort Cable (option)  
1x HDMI Cable (option)  
1x HDMI to DVI cable (option)  
1x MHL Cable (option)  
If any of the above items is damaged or missing, contact your retailer  
immediately.  
ASUS LCD Monitor VN289 Series  
1-1  
 
1.3  
Assembling the monitor base  
1. Attach the base to the arm. Beware to align the latch to the notch on  
the base.  
2. The end of the arm will slightly protrude from the base. No need to  
push it in.  
3. Screw the base to the arm tightly.  
1
3
2
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.  
1.4  
Connect cables  
1.4.1  
Detaching the cable cover  
1
1
2
3
1-2  
Chapter 1: Product Introduction  
 
1.4.2  
Rear of the LCD monitor  
9
8
10  
DVI  
HDMI/MHL  
DP  
7
1
2
3
4
5
6
1. AC-IN port  
2. DVI port  
3. HDMI / MHL port  
4. DisplayPort  
5. VGA port  
6. Audio - in Port  
7. Earphone - out Port  
8. Kensington Lock  
9. Screw Holes for VESA Wall Mount  
10. Control buttons  
Flip upward the IO port cover to connect cables. After connected cables,  
replace the cover and carefully push it upward to its original position with both  
thumbs at both sides of the cover.  
ASUS LCD Monitor VN289 Series  
1-3  
 
1.5  
Monitor introduction  
1.5.1  
Using the Controls button  
Use the control button on the back of the monitor to adjust the image  
settings.  
Standard Mode  
VGA 1920x1080@60Hz  
Menu  
QuickFit  
Input Select  
Close  
Brightness  
Splendid  
7 6 5 4 3 2 1  
1 2 3 4 5 6 7  
1.  
Power Button/Power Indicator:  
Press this button to turn the monitor on/off.  
The color definition of the power indicator is as the below table.  
Status  
White  
Amber  
OFF  
Description  
ON  
Standby mode  
OFF  
2.  
3.  
MENU Button:  
Press this button to enter the OSD menu.  
QuickFit Button:  
This is a hotkey to activate the QuickFit function designed for alignment.  
The QuickFit function contains 6 pages of common grid patterns, paper  
1-4  
Chapter 1: Product Introduction  
 
4.  
Input Select Button:  
Use this hotkey to switch from VGA, DVI, HDMI / MHL or DisplayPort  
input signal.  
5.  
6.  
7.  
Close Button  
Exit the OSD menu.  
Shortcut key1  
This is a Shortcut key. The default setting is Brightness.  
Shortcut key2  
This is a Shortcut key. The default setting is Splendid.  
ASUS LCD Monitor VN289 Series  
1-5  
 
1.5.2  
QuickFit Function  
The QuickFit function contains three patterns: (1) Grid (2) Paper size (3)  
Photo size.  
1. Grid pattern: Facilitates designers and users to organize content and  
layout on one page and achieve a consistent look and feel.  
Alignment Grid  
2. Paper size: Provides users to view their documents in real size on the  
screen.  
A4  
B5  
Letter  
A4  
B5  
Letter  
EXIT  
EXIT  
EXIT  
3. Photo size: Provides photographers and other users to accurately  
view and edit their photos in real size on the screen.  
2x2  
8x10  
4x6  
3x5  
5x7  
1-6  
Chapter 1: Product Introduction  
 
 
2.1  
Detaching the arm/stand (for VESA wall  
mount)  
The detachable stand of this monitor is specially designed for VESA wall  
mount.  
1. Disconnect power and signal cables. Carefully put the front of the  
monitor face down on a clean table.  
2. Use your fingers to loosen the screw located at the bottom of the  
base, and remove the base from the stand.  
3. Or you may directly use a screwdriver to remove the screws that  
secure the stand to the monitor, and detach the stand from the  
monitor.  
We recommend that you cover the table surface with soft cloth to prevent  
damage to the monitor.  
Hold the stand while removing the screws.  
1
4
2
3
The VESA wall mount kit ( 100 x 100 mm) is purchased separately.  
Use only the UL Listed Wall Mount Bracket with minimum weight/load 22.7kg  
(Screw size: M4 x 10 mm).  
ASUS LCD Monitor VN289 Series  
2-1  
 
2.2  
Adjusting the monitor  
For optimal viewing, we recommend that you look at the full face of the  
monitor, then adjust the monitor to the angle that is most comfortable  
for you.  
Hold the stand to prevent the monitor from falling while changing its  
angle.  
You can adjust the monitor’s angle from -5˚ to 20˚.  
-5 ~ 20  
60°  
60°  
13cm  
2-2  
Chapter 2: Setup  
 
3.1  
OSD (On-Screen Display) menu  
3.1.1  
How to reconfigure  
VN289  
Standard Mode VGA 1920x1080@60Hz  
Splendid  
Color  
Scenery mode  
Standard Mode  
Theater Mode  
Game Mode  
Image  
Sound  
PIP/PBP Setting  
Night View Mode  
sRGB Mode  
Input Select  
System Setup  
Shortcut  
Reading Mode  
Darkroom Mode  
1. Press the MENU button to activate the OSD menu.  
2. Press the and buttons to toggle between options in the  
Menu. As you move from one icon to another, the option name is  
highlighted.  
3. To select the highlighted item on the menu press the  
4. Press the and buttons to select the desired parameter.  
5. Press the button to enter the slide bar and then use the or  
button.  
buttons, according to the indicators on the menu, to make your  
changes.  
6. Select the  
to return to previous menu or  
to accept and return to  
previous menu.  
ASUS LCD Monitor VN289 Series  
 
3-1  
3.1.2  
1. Splendid  
This function contains eight sub-functions that you can select for  
OSD Function Introduction  
your preference. Each mode has the Reset selection, allowing you to  
maintain your setting or return to the preset mode.  
VN289  
Standard Mode VGA 1920x1080@60Hz  
Splendid  
Color  
Scenery mode  
Standard Mode  
Theater Mode  
Game Mode  
Image  
Sound  
PIP/PBP Setting  
Night View Mode  
sRGB Mode  
Input Select  
System Setup  
Shortcut  
Reading Mode  
Darkroom Mode  
Scenery Mode: This is the best choice for scenery photo displaying with  
SPLENDID™ Video Intelligence Technology.  
Standard Mode: This is the best choice for document editing with  
SPLENDID™ Video Intelligence Technology.  
Theater Mode: This is the best choice for movie watching with  
SPLENDID™ Video Intelligence Technology.  
Game Mode: This is the best choice for game playing with SPLENDID™  
Video Intelligence Technology.  
Night View Mode: This is the best choice for playing dark-scene game  
or watching dark-scene movie with SPLENDID™ Video Intelligence  
Technology.  
sRGB Mode: This is the best choice for viewing photos and graphics  
from PCs.  
Reading Mode: This is the best choice for book reading.  
Darkroom Mode: This is the best choice for a weak ambient light  
environmen.  
In the Standard Mode, the Saturation, SkinTone, Sharpness, and ASCR  
functions are not user-configurable.  
In the sRGB, the Saturation, Color Temp., SkinTone, Sharpness, Brightness,  
Contrast and ASCR functions are not user-configurable.  
In the Reading Mode, the Saturation, SkinTone, Sharpness, ASCR, contrast,  
and Color Temp functions are not user-configurable.  
3-2  
Chapter 3: General Instruction  
 
2. Color  
Select the image color you like from this function.  
VN289  
Standard Mode VGA 1920x1080@60Hz  
Splendid  
Color  
Brightness  
Contract  
Image  
Saturation  
Color Temp.  
Skin Tone  
Sound  
PIP/PBP Setting  
Input Select  
System Setup  
Shortcut  
Brightness: The adjusting range is from 0 to 100.  
Contrast: The adjusting range is from 0 to 100.  
Saturation: The adjusting range is from 0 to 100.  
Color Temp.: Contains three preset color modes (Cool, Normal, Warm)  
and User Mode.  
Skin Tone: Contains three color modes including Reddish, Natural, and  
Yellowish.  
In the User Mode, colors of R (Red), G (Green), and B (Blue) are user-  
configurable; the adjusting range is from 0 ~ 100.  
ASUS LCD Monitor VN289 Series  
3-3  
 
3. Image  
You can adjust the image Sharpness, Trace Free, Aspect Control,  
VividPixel, ASCR, Position (VGA only), Focus (VGA only), and Auto  
Adjust (VGA only), from this main function.  
VN289  
Standard Mode VGA 1920x1080 @ 60Hz  
Sharpness  
Trace Free  
Aspect Control  
VividPixel  
ASCR  
Splendid  
Color  
Image  
Sound  
PIP/PBP Setting  
Input Select  
System Setup  
Shortcut  
Position  
Focus  
AUTO Adjust.  
Sharpness: Adjusts the picture sharpness. The adjusting range is from  
0 to 100.  
Trace Free: Speeds up the response time by Over Drive technology. The  
adjusting range is from lower 0 to faster 100.  
Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”, “1:1”,  
Overscan”.  
VividPixel: ASUS Exclusive Technology that brings lifelike visuals for  
crystal-clear and detail-oriented enjoyment. The adjusting range is from  
0 to 100.  
ASCR: Select ON or OFF to enable or disable dynamic contrast ratio  
function.  
Position: Adjusts the horizontal position (H-Position) and the vertical  
position (V-Position) of the image. The adjusting range is from 0 to 100  
(Only available for VGA input).  
Focus: Reduces Horizonal-line noise and Vertical-line noise of the image  
by adjusting (Phase) and (Clock) separately. The adjusting range is from  
0 to 100 (Only available for VGA input).  
AUTO Adjust.: Automatically adjust the image to its optimized position,  
clock, and phase. (Only available for VGA input.)  
Phase adjusts the phase of the pixel clock signal. With a wrong phase  
adjustment, the screen shows horizontal disturbances.  
Clock (pixel frequency) controls the number of pixels scanned by one  
horizontal sweep. If the frequency is not correct, the screen shows vertical  
stripes and the image is not proportional.  
3-4  
Chapter 3: General Instruction  
 
4. Sound  
Adjust the sound settings to your preference.  
VN289  
Standard Mode VGA 1920x1080 @ 60Hz  
Splendid  
Color  
Volume  
Mute  
Image  
Source  
Sound  
PIP/PBP Setting  
Input Select  
System Setup  
Shortcut  
Volume: Adjusts the output volume level.  
Mute: Mute the output volume.  
Source: Adjusts audio source to “Line In” or “HDMI/MHL” (only available  
for HDMI/MHL input);  
Adjusts audio source to “Line In” or “DisplayPort” (only available for  
DisplayPort input).  
5. PIP/PBP Setting  
The PIP/PBP Setting allows you to open up another sub-window  
connected from another video source besides the main-window from  
your original video source.  
VN289  
Standard Mode VGA 1920x1080 @ 60Hz  
Splendid  
Color  
PIP/PBP Mode  
PIP/PBP Source  
Size  
Image  
Position  
Sound  
PIP/PBP Setting  
Input Select  
System Setup  
Shortcut  
Aspect Control  
Swap  
By activating this function, this monitor displays two pictures from two  
different video sources.  
PIP/PBP Mode: Selects PIP or PBP function, or turn it off.  
ASUS LCD Monitor VN289 Series  
3-5  
 
PIP/PBP Source: Selects the video input source among “VGA”, “DVI”,  
“HDMI/MHL”, or “DisplayPort”.  
Size: Adjust the PIP size to “Small”, “Middle”, or “Large”.  
Position: Adjusts the position of PIP sub-window to “Right-Top”, “Left-  
Top”, “Right-Bottom”, or “Left-Bottom”.  
Aspect Control: Adjusts the PIP aspect ratio and automatically adjust  
the PIP window size.  
Swap: Swaps the sources of the main- and sub-windows.  
Main-window  
VGA  
DVI  
Yes  
HDMI/MHL DisplayPort  
VGA  
DVI  
Yes  
Yes  
Yes  
Yes  
Yes  
Sub-window  
Yes  
Yes  
Yes  
HDMI/MHL  
DisplayPort  
Yes  
Yes  
Yes  
6. Input Select  
Select the input source from VGA, DVI, HDMI / MHL or DisplayPort  
input signal.  
VN289  
Standard Mode VGA 1920x1080 @ 60Hz  
VGA  
Splendid  
Color  
DVI  
HDMI / MHL  
DisplayPort  
Image  
Sound  
PIP/PBP Setting  
Input Select  
System Setup  
Shortcut  
3-6  
Chapter 3: General Instruction  
 
7. System Setup  
Adjusts the system configuration.  
VN289  
Standard Mode VGA 1920x1080 @ 60Hz  
Splendid Demo Mode  
GamePlus  
Splendid  
Color  
ECO Mode  
Image  
OSD Setup  
Sound  
PIP/PBP Setting  
Input Select  
System Setup  
Shortcut  
Language  
Key Lock  
Information  
More  
VN289  
Standard Mode VGA 1920x1080 @ 60Hz  
Splendid  
Color  
Back  
Power Indicator  
Power Key Lock  
All Reset  
Image  
Sound  
PIP/PBP Setting  
Input Select  
System Setup  
Shortcut  
Splendid Demo Mode: Activate the demo mode for the Splendid  
function.  
GamePlus: The GamePlus Function provides a toolkit and creates a  
better gaming environment for users when playing different types of  
games. Particularly, Aimpoint function is specially designed for new  
gamers or beginners interested in First Person Shooter (FPS) games.  
To active GamePlus:  
Select ON to enter the GamePlus main menu.  
Press and to select between Aimpoint and Timer function.  
Press  
to confirm the function you choose. Press  
to go back.  
Press to go off, and exit.  
GamePlus main menu  
GamePlus-Aimpoint  
ASUS LCD Monitor VN289 Series  
 
3-7  
GamePlus  
Aimpoint  
Timer  
(Practice Mode)  
GamePlus main-Timer  
GamePlus main-Timer-Position  
Position  
ECO Mode: Activate the ecology mode for power saving.  
OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of  
the OSD screen.  
Language: Select OSD language. The selections are: English, French,  
German, Spanish, Italian, Dutch, Russian, Traditional Chinese,  
Simplified Chinese, Japanese, Persian, Thai, Indonesian, Poland,  
Turkey, Portugal, Czech, Croatia, Hungary, Romania, and Korean.  
Key Lock: Disable all key functions. Pressing the second button on the  
right for more than five seconds to disable key lock function.  
Information: Displays the monitor information.  
More: Return the next page of System Setting.  
Back: Return the previous page of System Setting.  
Power Indicator: Turn the power LED indicator on/off.  
Power Key Lock: To disable / enable power key  
All Reset: Selects “Yes” to revert all settings to the factory default mode.  
3-8  
Chapter 3: General Instruction  
 
8. Shortcut  
Selecting this option allows you to set two shortcut keys.  
VN289  
Standard Mode HDMI 1920x1080@60Hz  
Splendid  
Color  
Shortcut 1  
Splendid  
Shortcut 2  
Brightness  
AUTO Adjust.  
Contrast  
Image  
Sound  
PIP/PBP Setting  
Color Temp.  
Volume  
PIP/PBP Setting  
Input Select  
System Setup  
Shortcut  
GamePlus  
Shortcut 1: User can select from “Splendid”, “Brightness”, “AUTO  
Adjust.”, “Contrast”, “PIP/PBP Setting”, “Color Temp.”, “Volume”,  
“GamePlus” and set as shortcut key. The default setting is  
Brightness.  
Shortcut 2: User can select from “Splendid”, “Brightness”,  
“AUTO Adjust.”, “Contrast”, “PIP/PBP Setting”, “Color Temp.”,  
“Volume”, “GamePlus” and set as shortcut key. The default setting  
is Splendid.  
ASUS LCD Monitor VN289 Series  
3-9  
 
3.2  
Specifications  
Model  
Panel Size  
VN289QL  
28” W (71.12 cm)  
Max. Resolution  
Brightness (Typ.)  
Intrisinc Contrast Ratio (Typ.)  
Viewing Angle (CR10)  
Display Colors  
Response Time (Typ.)  
D-Sub input  
1920 x 1080  
300cd/m2  
3000:1  
178°(V); 178°(H)  
16.7 M  
≤5 ms (Gray to Gray)  
Yes  
DVI Input  
Yes  
DP Input  
Yes  
Yes (MHL2.0)  
Power on<32 W*  
* Based on Energy Star 6.0 standard  
Yes (2W)  
HDMI / MHL input  
Power ON Consumption  
Note  
Speaker  
Earphone  
Yes  
Power saving mode  
Power off mode  
Tilt  
< 0.5 W  
< 0.5 W  
-5° ~ +20°  
VESA Wall Mounting  
Yes (100mm x 100mm)  
660.26 x 555.48 x 247.08 (with  
stand)  
Phys. Dimension (WxHxD)  
Box Dimension (WxHxD)  
Net Weight (Esti.)  
Gross Weight (Esti.)  
Voltage Rating  
764 x 465 x 224  
7.2 kg  
10.4kg  
AC 100~240V(Built-in)  
3-10  
Chapter 3: General Instruction  
 
3.3  
Troubleshooting (FAQ)  
Problem  
Possible Solution  
button to check if the monitor is in the  
Power LED is not ON  
Press the  
ON mode.  
Check if the power cord is properly connected to  
the monitor and the power outlet.  
Check Power Indicator function in main menu OSD.  
Select “ON” to turn on power LED.  
The power LED lights amber and  
there is no screen image  
Check if the monitor and the computer are in the  
ON mode.  
Make sure the signal cable is properly connected  
the monitor and the computer.  
Inspect the signal cable and make sure none of the  
pins are bent.  
Connect the computer with another available  
monitor to check if the computer is properly  
working.  
Screen image is too light or dark  
Adjust the Contrast and Brightness settings via  
OSD.  
Screen image is not centered or  
sized properly  
Open main menu OSD, Execute Image / Auto  
Adjust. Function (for VGA only).  
Adjust the H-Position or V-Position settings via  
OSD.  
Screen image bounces or a wave  
pattern is present in the image  
Make sure the signal cable is properly connected to  
the monitor and the computer.  
Move electrical devices that may cause electrical  
interference.  
Screen image has color defects  
(white does not look white)  
Inspect the signal cable and make sure that none of  
the pins are bent.  
Perform Reset via OSD.  
Adjust the R/G/B color settings or select the Color  
Temperature via OSD.  
Screen image is blurry or fuzzy  
No sound or sound is low  
Open main menu OSD, Execute Image / Auto  
Adjust. Function (for VGA only).  
Adjust the Phase and Clock settings via OSD.  
Make sure the audio cable is properly connected to  
the monitor.  
Adjust the volume settings of both your monitor and  
computer.  
Make sure the computer sound card driver is  
properly installed and activated.  
Make sure the audio source is correct on the OSD.  
ASUS LCD Monitor VN289 Series  
3-11  
 
3.4  
Supported Timing List  
VESA / IBM Modes Support Timing  
Resolution  
640 x 350  
640 x 480  
640 x 480  
640 x 480  
720 x 400  
800 x 600  
800 x 600  
800 x 600  
Refresh Rate  
Horizontal Frequency  
31.469KHz  
31.469KHz  
35KHz  
70Hz  
60Hz  
67Hz  
75Hz  
70Hz  
56Hz  
60Hz  
72Hz  
75Hz  
60Hz  
70Hz  
75Hz  
75Hz  
60Hz  
60Hz  
60Hz  
60Hz  
75Hz  
60Hz  
60Hz  
60Hz  
37.5KHz  
31.469KHz  
35.156KHz  
37.879KHz  
48.077KHz  
46.875KHz  
48.363KHz  
56.476KHz  
60.023KHz  
67.5KHz  
44.772KHz  
49.702KHz  
60KHz  
63.981KHz  
79.976KHz  
55.935KHz  
65.29KHz  
800 x 600  
1024 x 768  
1024 x 768  
1024 x 768  
1152 x 864  
1280 x 720  
1280 x 800  
1280 x 960  
1280 x 1024  
1280 x 1024  
1440 x 900  
1680 x 1050  
1920 x 1080  
67.5KHz  
HDMI 1.4 CEA-861 Formats Supported Timing  
Resolution  
640 x 480P  
720 x 480P  
Refresh Rate  
59.94 / 60Hz  
59.94 / 60Hz  
50Hz  
Horizontal Frequency  
31.469 / 31.5KHz  
31.469 / 31.5KHz  
31.25KHz  
720 x 576P  
1280 x 720P  
1280 x 720P  
1440 x 480P  
1440 x 576P  
1920 x 1080i  
1920 x 1080i  
1920 x 1080P  
1920 x 1080P  
1920 x 1080P  
50Hz  
37.5KHz  
59.94 / 60Hz  
59.94 / 60Hz  
50Hz  
50Hz  
59.94 / 60Hz  
30HZ  
44.955 / 45KHz  
31.469 / 31.5KHz  
31.25KHz  
28.125KHz  
33.716 / 33.75KHz  
33.75KHZ  
50Hz  
59.94 / 60Hz  
56.25KHz  
67.433 / 67.5KHz  
* The modes not listed in the above tables may not be supported. For optimal resolution, we  
recommend that you choose a mode listed in the above tables.  
3-12  
Chapter 3: General Instruction  
 

3M Oxygen Equipment 600107046 User Manual
AEG Clothes Dryer 57320 User Manual
AEG Cooktop FM 4803K AN User Manual
AEG Dishwasher 40660 User Manual
AEG Washer L 98485 FL User Manual
Airlink101 Network Card APO1200 User Manual
Axor Plumbing Product 067XX0 User Manual
Axor Plumbing Product 06064XX0 User Manual
Beko Dishwasher DSFN 1532 User Manual
Beko Flat Panel Television 19WLM550DHID User Manual