BB Electronics Network Card TS W Family User Manual

What you will need  
power supply  
may be either  
supply shown here  
Quick Start Guide  
Digi TS W Family  
PortServer TS 4 W  
shown  
Software &  
Documentation  
Ethernet cable not included  
Digi One TS
 
W, PortServer TS 2 
W, PortServer
 
TS 4
 
W  
B
PN:(1P) 90000305  
Connect  
serial device  
INSTALL  
Connect  
power  
supply  
Connect  
Ethernet  
cable  
RUN  
WIZARD  
Software &  
Documentation  
Insert CD  
If you have a UNIX system and it  
does not use an auto-mounter, you  
will need to manually mount the CD.  
See the back of this guide for UNIX  
specific instructions.  
Follow wizard  
Congratulations!  
The Wireless device is  
configured. Go to the User  
Guide on the CD for more  
information.  
REBOOT  
Re-connect  
power supply  
Disconnect  
power  
supply  
Disconnect  
Ethernet  
cable  
© Digi International Inc., 2004.  
Digi, Digi International, the Digi logo, the Digi Connectware logo, the Making Device Networking Easy logo, Digi One TS, PortServer TS W,  
and RealPort are trademarks or registered trademarks of Digi International, Inc. in the United States and other countries worldwide.  
All other trademarks are the property of their respective owners.  
 
Accessing the CD from a UNIX System  
Insert CD in system CD drive  
1
If your system auto mounts the CD, skip to step 5.  
Auto Mount programs may use the volume information  
to define a mount point. If the CD volume label is  
"Digi" then the mount point may be /cdrom/digi  
Software &  
Documentation  
UNIX  
2
Determine your CD device  
3
Common names for CD-ROM devices:  
Identify the mount-directory.  
Some common pre-existing mount points:  
/mnt/cdrom /cdrom  
NAME  
/dev/cdrom  
EXAMPLE  
/dev/cdrom  
/dev/cdrom/cdromn  
/dev/cdn  
/dev/cdrom/cdrom1  
/dev/cd0  
Or create your own: mkdir /mnt/mycdrom  
/dev/dsk/cktmdn  
/dev/c1t2d0  
HPUX - Check to see if pfs is running  
ps -ef | grep pfs  
If not, start the daemons:  
pfs_mountd&; pfsd&  
To list descriptions of devices:  
AIX: lscfg  
HPUX: - Make sure you have administrator privileges and  
your PATH includes /usr/sbin  
ioscan -funC disk  
Solaris: Most Solaris systems use an auto-mounter.  
See the man page on vold: man vold  
4
Mount the CD by entering one of the commands from  
the following table:  
Operating  
System  
5
Command  
Navigate to mounted CD directory, enter: ./setup  
mount -r -v cdrfs device mount-directory  
do not use mount, it will not operate correctly  
pfs_mount device mount-directory  
See man pages for pfsand pfs_mountfor more  
information.  
AIX  
If you see DISPLAY permission errors when running the CD,  
you may want to verify your DISPLAY variable is set.  
To set the DISPLAY variable:  
DISPLAY=localhost:0.0; export DISPLAY  
AND/OR  
*HPUX  
mount device mount-directory  
mount -r -F cdfs device mount-directory  
Linux  
SCO  
UnixWare  
SCO  
xhost +localhost  
mount -r -f ISO9660 device mount-directory  
OpenServer  
Solaris  
(Intel  
& SPARC)  
mount -F hsfs device mount-directory  
Most systems use an auto-mounter. See the man page  
on vold: man vold  
deviceis the path to the device file assigned to the cdrom drive,  
mount-directoryis the directory where the Digi CD is mounted  
*HPUX When finished, leave the CD directory and pfs_umount  
cd  
pfs_umount mount-directory  
(If you inadvertenly use umountinstead of pfs_umount, kill the  
pfs daemons to remove the CD-ROM.)  
 

Aastra Telecom Telephone 9116 User Manual
ADTRAN Network Router DSUIVESP User Manual
Advantek Networks Washer Dryer AWN USB 11N2 User Manual
Akai Work Light AL1915 User Manual
Alamo Lawn Mower Exten A Kut II User Manual
Alps Electric Switch SLLQ Series User Manual
Amana Clothes Dryer LEA20AW User Manual
American Standard Plumbing Product M968473 User Manual
Apple Network Card ZM034 4835 A User Manual
Audiovox Stereo Amplifier PAB 450R User Manual