BB Electronics Switch EIP308 User Manual

EIP308-1904ds - 1/2  
Model EIP308  
8-Port 10/100  
Ethernet Switch  
Description  
ModeI EIP308 is an 8-port 10/100 switch designed for the not-so-friendly industrial environment. The unit is housed in a  
rugged metal enclosure ready to be mounted on a DIN rail or panel. The switch is an unmanaged Layer 2 switch that  
provides auto MDI/MDIX crossover for easy plug-and-play applications.  
LEDs indicate power, speed and link/activity for easy visual diagnostics. External power supply is connected to three 2-  
position pluggable terminal blocks. A 9-30 VDC is the main power supply input. It also has a redundant 9-30 VDC for  
secondary DC source. If that is not enough, 24 VAC yields the third option for power supply. B&B Electronics’ power supply  
model 12DC1AST (9-30 VDC @ 1000mA) is required, not included.  
Features  
Fully IEEE 802.3 and 802.3u compliant  
Vertical or flat panel mountable  
Wide power input 9-30 VDC  
8-port unmanaged Layer 2 switch  
Auto detecting 10BaseT/100BaseTX  
Auto MDI/MDIX crossover for plug and play  
Ruggedized metallic enclosure  
Redundant wide power input 9-30 VDC  
24 VAC power input  
Speed and link/activity diagnostic LEDs  
Unique load LED’s for quick network status  
DIN rail mount with #DRAD35 adapters  
Applications  
Building automation  
Process control  
Ethernet I/O  
Motion control  
Remote data acquisition  
Communications gateway  
PLC and operator interface  
Environmental control  
Machine monitoring  
Factory floor Ethernet networks  
Connections  
Standard RJ45 female connectors are provided. Standard RJ45 plug cables are all that is necessary to connect your  
devices since the switch supports auto crossover. External power supply is connected using one of the three 2-position  
pluggable terminal blocks for convenience. Table 1 shows the RJ45 pinouts and Table 2 shows the LED indicators.  
PWR  
Table 1  
LNK/ACT  
SPD  
Pin Number  
Signal  
1
2
3
4
5
6
7
8
TX+  
TX-  
RX+  
not used  
not used  
RX-  
not used  
not used  
Table 2  
LED  
Color  
On  
Off  
Blinking  
SPD  
LNK  
PWR  
yellow  
green  
red  
100  
link  
power  
10  
no link  
no power  
reset/error  
data  
NA  
International Headquarters:  
707 Dayton Road P.O. Box 1040 Ottawa, IL 61350 USA  
Westlink Commercial Park Oranmore Co. Galway Ireland  
+353 91 792444 Fax +353 91 792445  
 

Accell Bicycle Accessories Cardio Comfort Pacer User Manual
AEG Washer 70330 User Manual
AKG Acoustics Headphones K27 User Manual
Alpine Car Stereo System DVA 5205P User Manual
Altec Lansing Speaker System SoundBlade User Manual
Altinex Network Card CNK221 User Manual
Altinex Switch MX2214RM User Manual
Athena Technologies Portable Speaker Point 5 System C5 User Manual
Atlona Car Satellite TV System AT PROHD44M SR User Manual
Bahco Impact Driver Ratchet Combination Wrench User Manual