BC Speakers Speaker System DE700TN User Manual

Specifications  
Throat Diameter (1)  
Nominal Impedance (2)  
Minimum Impedance  
Nominal Power Handling (3)  
Continuous Power Handling (4)  
Sensitivity (1W/1m) (5)  
Frequency Range  
Recommended Crossover (6)  
Voice Coil Diameter  
Winding Material  
38 mm (1.5 in)  
8 ohm  
8.4 ohm  
110 W  
220 W  
107.5 dB  
0.5 -18 kHz  
0.8 kHz  
75 mm (3 in)  
Aluminium  
0.14 mH  
Titanium  
1.9 T  
Inductance  
Diaphragm Material  
Flux Density  
Mounting and Shipping Info  
Four M6 holes 90° on 102 mm  
(4 in) diameter  
Overall Diameter  
Depth  
Net Weight  
Shipping Weight  
Shipping Box  
180 mm (7.1 in)  
70 mm (2.8 in)  
6.0 kg (13.2 lb)  
6.2 kg (13.6 lb)  
190x190x100 mm  
(7.5x7.5x3.9 in)  
1
Driver mounted on B&C ME90 horn  
2
Also available in 16 ohms, data upon request  
3
2 hours test made with continuous pink noise signal (6 dB crest factor)  
within the specified range . Power calculated on rated minimum  
impedance.  
4
HF Drivers  
220 W continuous program power capacity  
1.5” horn throat diameter  
Power on Continuous Program is defined as 3 dB greater than the  
Nominal rating.  
DE700TN  
5
6
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.  
12 dB/oct. or higher slope high-pass filter.  
75 mm (3 in) aluminium voice coil  
Titanium diaphragm  
500 – 18000 Hz response  
107.5 dB sensitivity  
Shorting copper cap for extended HF response  
 

3Com Network Card 3C510 User Manual
ADC Switch ICX 250 User Manual
Agri Fab Lawn Aerator 45 02941 User Manual
AllTrade Air Compressor 835534 User Manual
Altec Lansing Speaker System SoundBlade User Manual
Altinex Network Card VA6835FC User Manual
AMX Stereo Receiver NXC VOL4 User Manual
Badger Basket Refrigerator 9980 User Manual
Banner Automobile Accessories EZ LIGHT User Manual
Behringer Musical Instrument Amplifier BVT4500H User Manual