Specifications
Dimensions:
10½” (26.7cm)L x 24½” (62.2cm)W x 3½” (8.9cm)H
13½ lbs. (6.2kg)
Weight:
Power:
120VAC, 50/60Hz, 840 Watts
13½” (34.3cm)
Width Capacity:
Maximum Thickness:
Film Thickness:
Operating
1/16” (2mm)
1.5 mil up to 10 mil (37 micron - 250 micron) each side
Instructions
WARRANTY AND RETURN POLICY
Warranty:
Your laminator is warranted to be free of defects in materials and workmanship
for a period of one year from the date of purchase. In the event of a defect in
material or workmanship, your dealer will (at his/her option) repair or replace the
laminator.
No other warranty is implied except as stated above. This warranty does not cover
damage as a result of misuse, or any special or consequential damage, whether or
not foreseeable.
Return policy:
If your laminator is not operating properly, first review the instructions. If the
malfunction cannot be corrected, contact your dealer for instructions. Be sure to
have your machine serial number and date of purchase handy.
If the laminator must be returned to the dealer, it is your responsibility to ensure it
is packaged properly. Shipping damage as a result of improper packaging is not
covered under the terms of this warranty.
Model No.
PL135-4
(120V)
Revised 10/08/98
|